(1/4)
Brightness
Set the brightness of the video camera. The available range is between 0 and 255.
Set the contrast of the video camera. The available range is between 0 and 255.
(2/4)
Video Camera
Select the adjustment type of the video camera from [None], [Sharpness], and [Noise decrease].[Sharpness] displays subjects more clearly. It may also display more noise. [Noise decrease] decreases the contrast to mask any noise. [Sharpness]: Specify from 1 (weak) to 7 (strong).
Sharpness Filter Cycle
Set whether to emphasize the outline of the brightness signal. This allows a clearer representation of the details of the image.
(3/4)
Chroma (U) (0-255)
To represent colors using three types of information, luminance (Y), blue chrominance (U), red chrominance (V) (YUV format). Set the difference between luminance and blue composition with a value between 0 and 255. When human eyes are used to adjust this value, more data can be assigned to the brightness information, resulting in a high data compression ratio with less degradation in image quality.
Chroma (V) (0-255)
To represent colors using three types of information, luminance (Y), blue chrominance (U), red chrominance (V) (YUV format). Set the difference between luminance and red composition with a value between 0 and 255. When human eyes are used to adjust this value, more data can be assigned to the brightness information, resulting in a high data compression ratio with less degradation in image quality.
Tone (0-255)
Set the color tone of the video camera screen. The available range is between 0 and 255.
(4/4)
Horizontal Position
Select the horizontal position of the video input signal. The available range varies depending on the video signal of the camera to be used.
When the signal is NTSC
Set the horizontal position within the range of 9 to 138.
When the signal is PAL
Set the horizontal position within the range of 9 to 144.
When the signal is SECAM
Set the horizontal position within the range of 9 to 144.
Vertical Position
Select the vertical position of the video input signal. The available range varies depending on the video signal of the camera to be used.
When the signal is NTSC
Set the horizontal position within the range of 2 to 20.
When the signal is PAL
Set the horizontal position within the range of 2 to 22.
When the signal is SECAM
Set the horizontal position within the range of 2 to 22.