-
For details about the setting screen, refer to the setting guide.
M.17.5.2 Initialize Setting Guide - Initialize CF/SD Card
-
This function cannot be used when using the IPC Series and SP5000 Series Open Box.
Deletes all data in the CF/SD Card installed in the display unit.
For details about the setting screen, refer to the setting guide.
M.17.5.2 Initialize Setting Guide - Initialize CF/SD Card
This function cannot be used when using the IPC Series and SP5000 Series Open Box.
You cannot cancel the Initialization procedure after pressing the [Start] key. Do not turn OFF the power switch while initialization is in progress.
The following example describes initializing a CD card.
Enter offline mode and touch [Initialization Menu] in the item change over buttons.
From the [Initialization Menu] screen, touch [Initialize CF Card].
From the [Initialize CF Card] screen, touch the input field and type "1101" (when the [System Password] is [Disable]) or type the system password.
Touch [Start].
[Is that really alright] confirmation message appears. Touch [Yes].
When a message appears indicating initialization is complete, touch [Close].