17.2.1 Procedure - Changing and Displaying Messages (Text)

1. From the [Parts (P)] menu, select [Message Display (M)] or click . Place the Part on the screen.

2. Double-click the new Message Display. The following dialog box appears.
   

3. In the [Mode] drop-down list, select the method for changing messages. (For example, Word)

4. In [Address], set the address to trigger the message display.

5. Click the [Display] tab. In the [Text Type] section, select [Direct Text].
   

6. In the [Number of Messages] drop-down list, set the number of messages to display. For example, 4

7. Set the message Font Type, Size, and Display Language.

8. In the [Align] section, set the text position. (For example, Center)

9. Set the message for each state.
   In the [Select State] drop-down list, select [State 0] and type the message in the [Register Message] box.
   (If this box is left blank, the message displays nothing.)

10. In the [Select State] drop-down list, select [State 1] and type "Abnormal Pressure" in the [Register Message] box.
    (When State 1 is stored in [Address], "Abnormal Pressure" displays.)

11. In the [Select State] drop-down list, select [State 2] and type "Confirm Rack Enabled" in the [Register Message] box.
    (When State 2 is stored in [Address], "Confirm Rack Enabled" displays.)

12. As needed, set the Text Color and Plate Color for each state on the [Color] tab, and click [OK (O)].