Channel Number
Select the Channel to configure color settings. Channel Color
Channel Color
Line Type
Select to display the lines on the Graph. Choose a line type from among 5 kinds: Solid Line, Dashed Line, Dash Line, Chain Line, and Two-Dot Chain Line.
When the data display spacing is less than 16 dots, line types other than the solid line may not display correctly.
Line Thickness
Set the line thickness from 1 to 2.
Display Color
Select the data line color.
Background Color
Select the data line background color.
Pixel Size
Select to display dots on the graph. Choose a dot type from among the following patterns 
, 
, 
, 
, 
, 
, 
. The dot size is fixed at 5 pixels.
This cannot be used at the same time as the Detail Settings' [Fill Below Line] on the [Color] tab.
Border Color
Select the border color of the Data Block Display Graph.
Scale Color
Select the graph's scale color.
Graph Area Color
Select a color for the Graph Display Area.
Blink
Select the blink and blink speed. You can choose different blink settings for the line's [Display Color] and [Background Color], the dots [Display Color], and the Graph's [Border Color], [Scale Color], and [Graph Area Color].
Depending on your display unit's model and [Color] settings, you may not be able to set Blink (from the [Project] menu, point to [System Settings] and click [Display Unit]).
1.6 Supported Colors
Depending on the shape, you may not be able to set a [Display Color], [Pattern Color], or [Border Color].