42.7.1 Procedure - Saving the Current Screen at Run time (Screen Capture)

Configure settings to capture the current screen on the display unit. (Use "D100" as the control address for the capture.)

1. From the [Project] menu, select [System Settings], and click [Display Unit] to open the [Mode] tab.

2. From [Screen Capture], select the [Capture Action] check box. In [Save in] select [CF Card].
   

   

   • Supported external storage devices vary depending on the model.
     1.5 Supported Features

   • To save to a FTP server, from [Project] menu select [System Settings] and click [FTP Server Settings] to register the FTP server.

3. In the [Control Word Address] enter D100.

4. After storing the file number in [Control Word Address]+2 (D102), the bottom bit (Bit 0) in the [Control Word Address] D100 turns ON and the screen capture is run. (In the file name [CP*****.jpg], the asterisks represent the file number.