Defines the data storage location for the folder defined from the [Project] menu's [Information], [Destination Folder] command.
If you are using a Windows Embedded machine, you can set the write filter (write protection) on drives installed with the operating system. If the Write Filter setting is enabled, specify a drive path that does not have Write Filter set.
Define a Destination Folder that is different from the [CF Card Folder] or [USB Storage Destination Folder]. Otherwise, an error will occur.
You can set folders that replace external storage on the network; however, file names may not be displayed correctly, depending on the connected environment such as operating system or language settings.
Supported external storage devices differ depending on the display unit. For more details, please refer to the following.
1.5 Supported Features
CF Card (SD/CFast Card)
Specify the folder on the CF Card/SD Card/CFast Card to save to, or alternatively, specify the full path of the folder to use. Set up a path up to 200 single-byte characters long.
If you do not set a path, it is saved in the "CFA00" folder under "C:\ProgramData\Pro-face\WinGP".
USB storage
Specify the folder on the USB Storage (USB Memory etc) to save to, or as an alternative, specify the full path of the folder to use. Set up a path up to 200 single-byte characters long.
If you do not set a path, it is saved in the "USBHD" folder under "C:\ProgramData\Pro-face\WinGP".