Thank you for the purchase of your Pro-Server EX V1.2. This program is for updating Pro-Server EX to Ver1.22.000. The setup procedure of the program is as follows. - Setup Procedure This program should be run on a PC in which Pro-Server EX V1.21.000 has been installed. Do not uninstall Pro-Server EX because this installer overwrites only the parts to be updated. Be sure to close programs of Pro-Server EX before starting installation. 1. Execute the provided program on the PC in which Pro-Server EX V1.21.000 has been installed. 2. Once the installer is activated, follow the directions displayed on the screen. If there are any problems and installation cannot be completed, please contact our company. - Problems resolved in V1.22.000 1. On the setting screen for Data Transfer, a right device address might be judged to be wrong. 2. A name of the symbol sheets might be automatically changed. 3. In Device Monitor, certain characters cannot be displayed when Data Type was set as character string. 4. Communication function didn't operate normally. 5. There might be no response from the target Node during the Device Access. 6. Pro-Server EX might freeze when it received transferred data. 7. File timestamp information which was stored in the directory information saved in EasyGetListInCard or EasyGetListInCfCard might be partly wrong. - Added Function in V1.22.000 1. LT3000 has been added as Node. 2. Available for terminal services - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If you have any questions regarding your PC or Windows, contact your local agent or manufacturer of the PC. Digital Electronics Corporation 8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan Phone +81-6-6613-1101 Fax +81-6-6613-5888 http://www.pro-face.com/ (c) 2008 Digital Electronics Corporation