Thank you for the purchase of your Pro-Server EX V1.0 / 1.1 / 1.2. This program is for updating Pro-Server EX to Ver1.21.000. The setup procedure of the program is as follows. - Setup Procedure This program should be run on a PC in which Pro-Server EX V1.0 / 1.1 / 1.2 has been installed. Do not uninstall Pro-Server EX because this installer overwrites only the parts to be updated. Be sure to close programs of Pro-Server EX before starting installation. 1. Execute the provided program on the PC in which Pro-Server EX V1.0 / 1.1 / 1.2 has been installed. 2. Once the installer is activated, follow the directions displayed on the screen. If there are any problems and installation cannot be completed, please contact our company. - Problems resolved in V1.01.000 1. When a network project file different from that of the PC is transferred to GP series/GP3000 series NODEs and then Data-Transfer (Distributed/Collection Type) to the PC is executed, an error might occur. 2. Device Monitor does not display a 2-byte array group name. 3. In the Execution Sequence List of 'Create form using Excel' Action, if a character '\' is singly inputted as the export-destination file pass of the Excel operation, an error occurs. 4. An error might occur if the DELETE key is pushed down on DataGrid of Global-Constant-Setting Dialog. 5. When EasyLoadNetworkProject() of ProEasy API is called in frequent succession, Pro-Server EX might stop working. 6. Even if Pro-Server EX and Pro-Studio EX read the same network project, it might be displayed that the two projects are different. 7. An error might occur when the data of Symbol is pasted. 8. An error might occur when the data of Global-Constant is copied. 9. In the following themes of "New Form", there is a part that doesn't operate normally. 1. Production Management Board(per Month) 2. Production Progress Management Board 3. Setup Work Planning and Result Management Board 4. Andon 5. Equipment Checklist 6. Waster List 7. First Run Rate Transition Graph (per Month) 8. First Run Rate Transition Graph (per Year) - Added Function in V1.01.000 1. It is available to Import/Export Global-Constant. 2. It is available to link the project data of GP-Pro EX V1.10.000. - Problems resolved in V1.02.000 1. In API Functions, BeginQueuingRead() and BeginQueuingWrite() can queue 1501 requests though the maximum number of requests is 1500. - Added Function in V1.02.000 1. API Functions support VB.NET and C#.NET. - Problems resolved in V1.10.000 1. It has been made impossible to transfer a network project to the GP3000 series Nodes with the welcome screen. 2. Garbling might occur in the configuration dialog of 'Create form using Excel'. - Added Function in V1.10.000 1. WinGP NODEs are supported as Node. 2. The system variable and the control variable of GP-Pro EX are supported. - Problems resolved in V1.20.000 1. An error occasionally occurred when "Link between Device Info and Symbol Info" function was used for the GP Series Node. 2. Data Transfer did not work in very rare timing when Data Transfer was executed at the same time. 3. Trigger Condition was not satisfied at 0:00 in some cases. 4. In character string access API, an error occurred when 256 or more was specified as the number of character strings. 5. When "Programming Assist"-"VB & VBA"-"Read Function" was selected from the menu of Pro-Studio EX in other than Japanese OS, the declaration of "Write Function" was occasionally copied. 6. A Memory leak may occur if you perform the following operations on Windows XP SP2 and Windows Server 2003. - Reloading a network project file - CF card access processing to GP Series 7. When the network project was saved specifying "Condition 2" in "Trigger Condition", the value saved as "Data Type" value of "Condition 2" was different from the one specified in it. 8. When "Automatic Upload of GP Filing Data" Action was executed for GP3000 Series Node, the data upload occasionally failed due to an error. 9. When download was normally completed for GP3000 Series Node in "Automatic Download of GP Filing Data" Action, the Excel process remained. 10.When an equipment name is specified in "Device name" of "Write Data from CSV file" Action, the equipment name occasionally did not become effective. 11.When Queuing Access API was executed to cache-read a GP Series Node device, the access time was occasionally longer than in the case the Queuing Access API was not used. - Added Function in V1.20.000 1. The following protocol is supported. Maker: Rockwell Automation Device Type: EtherNet/IP SeriesF ControlLogix/CompactLogix Series Native 2. Pro-Server EX Runtime supports the Windows Service. 3. "Sample Wizard" enables you to specify an arbitrary device. 4. Items registered in "Feature" screen are not deleted by execution of "Import Nodes and Symbols" function. 5. The "Create form using Excel" Action has been improved as follows. - The function to save an output book file at the time of executing an Action has been added. - The maximum number of lines that can be set in "Create form using Excel" Action has been increased from 1500 to 65535. - "List Action Areas" function has been added. 6. The following PS Series is supported. - PS3710A-T41 - PS3711A-T41 - Problems resolved in V1.21.000 1. When the string data was written with the "Download from the database" Action, unnecessary NULL was written. 2. The error occured when the device name including more than five "."s was specified. 3. When Pro-Server EX was installed in the condition that Pro-Server with Pro-Studio for Windows had not been normally uninstalled, Pro-Studio EX/Pro-Server EX did not start. - Added Function in V1.21.000 1. The start-up time on Pro-Studio EX was improved. 2. The error message in the "Check Consistency" was improved. 3. In Data Transfer, even if GLC Symbol is specified as a Transfer Source, it is available to specify the number of transfer data. 4. System variables newly added in GP-Pro EX V2.10 are supported. 5. PRX created in GP-Pro EX V2.10 is supported. 6. Filing data in Float format is supported. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - If you have any questions regarding your PC or Windows, contact your local agent or manufacturer of the PC. Digital Electronics Corporation 8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan Phone +81-6-6613-1101 Fax +81-6-6613-5888 http://www.pro-face.com/ (c) 2007 Digital Electronics Corporation