Thank you for the purchase of your Pro-Server EX.

This program is Add-on OPC Server for Pro-Server EX V1.00.000 to Pro-Server EX.
The setup procedure of the program is as follows. 

- Setup Procedure
This program should be run on a PC in which Pro-Server EX 1.20.000 or later
has been installed.

Do not uninstall Pro-Server EX because this installer 
overwrites only the parts to be updated.

Be sure to close programs of Pro-Server EX before starting 
installation.

1. Execute the provided program on the PC in which Pro-Server EX 1.20.000
   or later has been installed.

2. Once the installer is activated, follow the directions displayed on the screen.
   If there are any problems and installation cannot be completed, please contact
   our company.

- OPC Server for Pro-Server EX Operating Environment
The following hardware and software are necessary to operate
OPC Server for Pro-Server EX.

PC:                         IBM-PC and PC/AT compatible

Processor:                  Intel Pentium III processor 600MHz or more,
                            or compatible processor (1GHz or more recommended)

Memory Requirements:        512MB or more (1GB or more recommended)

Hard Disk Capacity:         Available capacity: 600MB

Supported Operating System: Microsoft Windows Server 2003 R2
                            Microsoft Windows XP Professional Edition SP2
                            Microsoft Windows 2000 Professional Edition SP4
                            Microsoft Windows 2000 Server Edition SP4

Other Software:             Microsoft .NET Framework 2.0
                            Pro-Server EX V1.20 or later version
                            Microsoft Internet Explorer V6.0 or later

-Cautions after setup
'Repair' install function is not available in OPC Server for Pro-Server EX
installed by this program.
After uninstalling OPC Server for Pro-Server EX, install this update again.

- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If you have any questions regarding your PC or Windows, contact your local agent 
or manufacturer of the PC.


Digital Electronics Corporation
8-2-52 Nanko Higashi, Suminoe-ku, Osaka 559-0031, Japan
Phone +81-6-6613-1101  Fax +81-6-6613-5888
http://www.pro-face.com/

                                       (c) 2007 Digital Electronics Corporation