 |
| Software Update Module / Add-on Software |
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
This program should be run on a PC on which Pro-Server with Pro-Studio Ver. 4.13 has already been installed.
If your version of Pro-Server with Pro-Studio is earlier than Ver. 4.13, please update it with the following module. |
| - |
Pro-Server with Pro-Studio Ver. 4.13 |
Note in Setting
the Program:
When you install Pro-Server with Pro-Studio with the setup type "Custom", please be aware of the following. |
| - |
If the action functions are added from the master CD after Pro-Server with Pro-Studio is updated to Ver. 4.14 with this module, the action functions will not be updated to Ver. 4.14.
In this case, please uninstall Pro-Server with Pro-Studio, and reinstall Pro-Server with Pro-Studio with your desired action functions, and then run this upgrade package to use the added actions with Pro-Server with Pro-Studio Ver. 4.14. |
|
| File Name |
Pro-ServerV414.exe |
| File Size |
834KB |
| Applicable Version |
Pro-Server with Pro-Studio Ver. 4.13 |
| Description |
Module for updating Pro-Server with Pro-Studio to Ver. 4.14 |
| Features |
| 1. The following functions have been improved. |
| - |
In "Import C-Package Symbol", when a project in which GP type has been set to the GLC series in GP-PRO/PB III C-Package is specified, it may impossible to import all symbols. |
| - |
When selecting a CSV file in the "Automatic Download of GP Filing Data" dialog, if the CSV file was created as unchecked zero suppress and saved as .csv in an "Automatic Upload of GP Filing Data" action, an error message appeared. |
|
|
|
| Module Installation (This
is a self-extracting file) |
| 1. |
Confirm that Pro-Server with Pro-Studio Ver. 4.13 is installed on your PC. |
| 2. |
Since this software update module only overwrites the modified sections of the program (a portion of the program), do not uninstall Pro-Server with Pro-Studio from your PC. |
| 3. |
Be sure to quit Pro-Server with Pro-Studio before installing this module. |
|
| |
| Installation Procedure |
| 1. |
Click on the link "Pro-ServerV414.exe" in the box above to download the file to the desired folder. |
| 2. |
After the download is completed, double-click on the "Pro-ServerV414.exe" file to start installation. |
| 3. |
Follow the installer program's directions. |
| 4. |
When installation is completed normally, " Setup completed." is displayed.
If there are any problems and installation can not be completed, contact our company. |
| 5. |
Start up Pro-Studio.
Select [Help] - [About(Pro-Studio)] in menu of Pro-Studio.
Check that the version number displayed in the dialog box is Ver. 4.14.
* The version number displayed in the Windows [Control Panel | Application Add/Delete] dialog box remains unchanged. |
|
|
| Important: |
| 1) |
When a Project file has been edited as in the following example, symbols can NOT be used on the GP unit's screen after Pro-Studio's [Import C-Package Symbol] has been performed: |
|
| - |
After all GP-PRO/PBIII C-Package special protocol symbols have been deleted, the same symbols are again added to the project and the project file saved without changing/updating the screen used. |
|
|
Solution: After changing a screen's symbol data, be sure to make a change in the actual screen data before saving. This will allow the Import feature to be used.
|
| 2) |
When the network project Provider data size is from 59500 to 61440 bytes:
Sending Provider information to the GP unit results in a "size overflow" error, even though no error occurs when the Provider data is checked.
Solution: The file size at transfer time is the true maximum file size. Therefore, tune the Provider information until this error stops.
|
| 3) |
| - |
"Write Data to Excel book" action. |
| - |
"Upload of GP Log Data" action (for template file selection) |
| - |
"Automatic Upload of GP Filing Data" action (for saving destination selection) |
| - |
"Automatic Download of GP Filing Data" action (for download file selection) |
|
|
If the media used in the drive you have selected using any of the above feature's drive selection combo boxes does not exist (Ex. selecting a floppy disk drive when no floppy disk is inserted) this will, display a dialog box, and the desired action cannot be registered. Also, the data setup dialog box will not be displayed.
Solution: Restart Pro-Server. |
|
| Last Updated: June.14, 2004 |
|
