***************************** GP-Pro EX Ver.4.0 **************************** April 2015 Digital Electronics Corporation Preface Thank you for using GP-Pro EX. GP-Pro EX is software to create logic programs and screen data for graphical operation touch panels. The Windows environment ensures operability and high performance. Please visit the Pro-face website (http://www.pro-face.com/) for the latest information. Table of Contents (0) Version (1) New Features List = V4.03.100 ===== 1-1 Support of New Models = V4.03.000 ===== 1-1 Support of New Models = V4.02.000 ===== 1-1 Support of New Models = V4.01.000 ===== 1-1 Support of New Models = V4.00.000 ===== 1-1 Support of New Models (2) Limitations 2-1 Display Unit 2-2 Device/PLC 2-3 WinGP 2-4 Pro-face Remote HMI Server (3) When Serial No. and License Key Code are not input (4) Installation and Uninstallation 4-1 Installation 4-2 Uninstallation (5) User Registration (6) Manuals (7) Fixed Defects = V4.03.200 ===== 7-1 Editor 7-2 Display Unit = V4.03.100 ===== 7-1 Editor 7-2 Display Unit 7-3 Pro-face Remote HMI Server = V4.03.000 ===== 7-1 Editor 7-2 Display Unit 7-3 Pro-face Remote HMI Server = V4.02.000 ===== 7-1 Editor 7-2 Display Unit 7-3 Pro-face Remote HMI Server = V4.01.000 ===== 7-1 Editor 7-2 Display Unit 7-3 Device/PLC = V4.00.000 ===== 7-1 Editor 7-2 Display Unit 7-3 Device/PLC Contents ================================================================================ (0) Version Editor: Ver.4.03.200 System/Runtime: Ver.4.3.20 (SP-5B40, WinGP) Ver.4.3.10 (Other than above models) Sub-system/OS Core: Ver.4.3.10 (SP-5B10, GP-4200, GP-4300, GP-4400, GP-4500, GP-4600 series. Except for GP4000M series.) Ver.1.2.4 (LT4000 series) Ver.1.3.0 (GP4000M series) Ver.1.1.3 (GP-4104) Ver.1.3.3 (GP-4105, GP-4106, GP-4107) Ver.3.6.5 (GP3400 series, GP3500 series, GP3600 series, GP3700 series) Ver.3.6.0 (ST3000 series, GP-3200 series, AGP3310HT, AGP3300HS/HL) Ver.3.6.3 (LT-3300 series, AGP3300T/U/S/L, AGP3301S/L) Ver.3.5.1 (Other than above models) Memory Loader: Ver.4.3.10 (1) New Features List = V4.03.100 =================================================================== 1-1 Support of New Models - You can now expand the user screen area in AGP-3560T. = V4.03.000 =================================================================== 1-1 Support of New Models - You can now check search results from a recipe list part by using system variables. - You can now use a system variable to copy, save, and reload recipes. - You can now receive recipe labels. - The File Manager can now use the Remove DEL Key feature with CF/SD cards. - Pro-face Remote HMI is now available in WinGP. - Pro-face Remote HMI now supports multiple client connections. - Function version upgraded communication driver - OMRON Corporation CS/CJ/NJ Series EtherNet/IP - Added support for double-byte characters on the NJ series. - YASKAWA Electric Corporation MP/INVERTER/SERVO Ethernet - Sigma-7 series is supported. = V4.02.000 =================================================================== 1-1 Support of New Models - In the Common Settings, you can now set up [No timeout] for the timeout time. - In the Common Settings, you can now set up [No timeout] for the timeout time. - When communication is unstable, you can now define a timer for terminating the connection. - When using the Start application command, you now have the option to suppress WinGP CPU usage. - Function version upgraded communication driver - ODVA EtherNet/IP Explicit Messaging - Implicit messaging now supported. - Custom Explicit message now supported. - TOSHIBA MACHINE Co., Ltd. TC Series(TCmini/TC200) Device Data Copy Tool - Now supports VGA display. - YASKAWA Electric Corporation MEMOBUS Ethernet Device Data Copy Tool - Added support for new transfer files. (Maintenance Monitor Setting, FTP Client definition.) - The following products now run on Windows 8.1. - GP-Pro EX (screen editor) - Transfer Tool - Version Reverter - Project Comparison Tool - Project Converter - Recovery Tool - Pass-Through - WinGP - WinGP SDK - Device Data Copy Tool - Open Box (SP5B40) models now support portrait orientation. - The following now support VGA display: - SP5000 series (Box Module) - SP-5B10 (Display Module) - SP-5500TP - SP-5600TP - SP-5660TP - SP-5700TP = V4.01.000 =================================================================== 1-1 Support of New Models - You can now import the recipe data of enhanced recipes. - Importing/exporting enhanced recipes You can now import and export element labels and recipe labels. - Enhanced recipe search You can now use system variables to search for enhanced recipes. - Mapped address You can now edit enhanced recipe element values on the device/PLC. - Send options When transferring an enhanced recipe to a device/PLC, you can write the enhanced recipe's label and ID to the defined address. - Function version upgraded communication driver - Beckhoff Automation GmbH TwinCAT ADS/AMS - Support TwinCAT3. - Reading a large number of array elements has been optimized. = V4.00.000 =================================================================== 1-1 Support of New Models - The following models are now supported: - GP-4000M (Rear Modular Type) - SP5000 series (Box Module) - SP-5B10 - SP-5B40 (Display Module) - SP-5400WA WVGA(800*480) - SP-5500WA WXGA(1280*800) - SP-5500TP SVGA(800*600) - SP-5600TP XGA(1024*768) - SP-5660TP XGA(1024*768) - SP-5600WA WXGA(1280*800) - SP-5700TP XGA(1024*768) - Pro-face Remote HMI Server function is now supported. - Pro-face Remote HMI function is now supported on the SP5000 Series. - Pro-face Remote HMI function is now supported on the GP-4000M Series. - Server list screen now supports monitoring triggered alarms. - You can now create a project using [Create Project From Configuration File (Pro-face Device Configurator)]. - Newly-added communication driver - CoDeSys Automation Alliance CoDeSys Ethernet - CoDeSys Automation Alliance CoDeSys SIO - Control Techniques MODBUS SIO Master - Control Techniques MODBUS TCP Master - IEC Standard IEC 60870-5-101 - Siemens AG Ethernet Gateway MPI/PROFIBUS - Function version upgraded communication driver - Mitsubishi Electric Corporation FX Series CPU Direct The following setting was added: FX3S Series is supported. (2) Limitations 2-1 Display Unit (Runtime) - When a USB device is inserted/removed, all USB devices may not become disabled under the condition that five or more USB devices are connected at the same time using the USB HUB in GP-4000 series. If this phenomenon occurs, reset the Display. - When two or more Data Displays with "Indirect" specified are made to be invisible at the same time while displaying a pop-up keypad, some Data Display may not be invisible. - A keypad is closed while the [Alt] key on the keypad of the RPA Window Display is held down. When the keypad is opened next time, the [Alt] key remains held down. - Do not use a logic program during communication with a Device/PLC using a USB/SIO (RS422/485). If the logic program is used in the situation, a communication error may occur. - In GP4000 series (except for GP-4100 series) and LT4000 series, the buzzer sound in Ver. 3.5 is different from that in Ver. lower than 3.5. - Do not attach/detach the fingerprint authentication unit while turning on the power to the Display. Doing so, inconsistency occurs between the security data and the fingerprint data and the display of the authentication and the password setting may not operate normally. If an inconsistency occurs between them due to attachment/detachment of the fingerprint authentication unit, update the fingerprint data of the fingerprint authentication unit using the "Update DB" function. - Do not attach/detach the transfer cable while transferring to the SP5000 Series Open Box (SP-5B40). Even if the cable is detached, the unit will not detect an error. - On the Power Box(SP-5B10) of the SP5000 series, In the case of forced transfer mode, you can not transfer using LAN2. - Compared to other series, the buzzer for the Open Box's (SP-5B40) Bit Momentary switch sounds different. - The Windows task bar flickers if you continually trigger the system menu's display operation (simultaneously touch the top-right and bottom-left corners) on the SP5000 series Open Box (SP-5B40). - On the SP5000 series Open Box (SP-5B40), after transfer operation, restarting or closing WinGP causes the sound to buzzer and lights to flash in red for all lights on the EZ Tower Light. - On the SP5000 series Open Box (SP-5B40), even though there are no devices connected, in the offline menu, the Peripheral Settings screen's USB Screen shows USB equipment. 2-2 Device/PLC - In Pro-Server EX's Device Monitor function when a Multiple Bit Write operation is performed on an array type Tag it may not write correctly. - When single bit write operation is performed on a 32-bit Tag(DINT), the 16th bit cannot be written. - When a Copy / Paste operation which results in the maximum number of Tags being exceeded no error is displayed. - When several Tag Data Files are created, the maximum number of Tags may not be checked correctly. - In Pro-Server EX's Device Monitor function the Multiple Bit Write operation may not work in some cases. - Do not use "Indirect" setting for the String type. If it is specified, data may not be displayed normally. - When STRING variables are displayed in Device Monitor of Pro-Server EX, only two characters are displayed. - Some spelling mistakes are found in English error messages. - If an error occurs during communication, set "1" or larger value for Retry Count. - When a bit device is specified in Alarm Summary, alarms of 17th bit or later are not displayed normally. If this phenomenon occurs, use the word device. - When the link parameter device is read, the communication cycle time becomes an illegal value. - In a screen where a Display Unit does not communicate with a PLC: When an access is made to the PLC using the pass-through function after the PLC is restarted, the password lock occurs to the PLC. Make connections using the pass-through function after the screen is shifted to the one where the Display Unit communicates with the PLC. - Do not write the data including the bit address with the extended recipe function. If such writing is made, a communication error may occur. - Do not input 32 or more characters for the device address in Address Input of Device Monitor. - Tag information allocated to I/O units may not be imported normally. If this phenomenon occurs, edit the data with the Editor manually. - When bit read/write for two or more points is performed to a bit-accessible word device or word type tag, an address other than the specified address may be read/written. - The pass-though function cannot be used when WinGP and IIS FTP servers are used at the same time. 2-3 WinGP - The buzzer of WinGP does not sound in PS-4700 (Z510). - When the File Manager displays a folder path and data in that folder is updated, the folder path reverts to the default path. - The system load status or wireless communication status may prevent the application from disconnecting within the time specified by the property: Disconnect after communication is down for. (3) When Serial No. and License Key Code are not input - Project data cannot be transferred to the operation panels (except for GP4100 series, IPCs and PC-ATs (Used WinGP)). - Transfer using the Transfer Tool is not available for WinGP. However, using ProjectCopy, you can copy screen data and get it to work. To use ProjectCopy, click [Start]-[All Programs]-[Pro-face]-[WinGP]- [ProjectCopy] on the Windows desktop screen. However, note that ProjectCopy cannot be used in the following cases: - When system data has not been transferred - When system data has been changed WinGP automatically stops after three hours of continuous operation. * It is possible to input the serial No. and the license key code after installation of the software. Start the product and go to [Help]-[Enter Key Code]. (4) Installation and Uninstallation 4-1 Installation - Be sure to quit all application programs and close (disable) all resident programs such as virus detection software before installing the software. - Install this software using a user account with Administrator privileges. - Refer to our support site "Otasuke Pro!" (http://www.proface.com/otasuke/) for the operating environment. - By inserting a disk into the DVD drive, Setup window will appear. If the Setup window does not appear, click the desktop's [Start] button and then click [Run]. In the text input field, enter [D:\ProEX_Setup.exe] and click [OK]. (As for the "D:\" part, enter your DVD drive name.) * Some of the tools require a license. In cases below, USB transfer cables may not be recognized correctly: - When you installed the software with a USB transfer cable connected - When you started using the software without restarting your computer - 1)Insert the DVD media of Windows 8 into the DVD drive. If there is no DVD media of Windows 8 found, contact the PC manufacturer. 2)Select "Open command prompt as administrator" on the Explorer. 3)Execute the following command at the Command Prompt. Dism /online /enable-feature /featurename:NetFx3 /All /Source:x:\sources \sxs /LimitAccess *) For x:, specify the drive letter of Windows 8 Install Media or the DVD drive. 4-2 Uninstallation To uninstall the software, click on [Start], then select [All Programs]- [Pro-face]-[***], and execute [Uninstall]. ("***" represents the product name and version.) Project files and files in your package files will not be removed by this operation. Delete other tools from [Start]-[Control Panel]- [Add or Remove Programs]. (5) User Registration Please register your software to help us offer enhanced customer support. Since you can confirm the registered information at anytime once you register, you do not have to worry even if you lose it. To register, insert a DVD into the DVD drive, select the User Registration menu in the Set Up Menu screen and complete the online Software User Registration. You can also register after installation by starting the product and registering from [Help]-[Online User Registration]. (6) Manuals To view PDF manuals, the Adobe Reader software must be installed on your computer. Start the product and select [Manual] from the [Help(H)] menu. To view only the manuals, select [Start]-[All Programs]-[Pro-face]-[***] -[Manual].("***" represents the product name and version.) Some manuals need to be downloaded from our support site "Otasuke Pro!". (7) Fixed Defects = V4.03.200 =================================================================== 7-1 Editor (Editor) - In the Editor, there were instances when the [Series] field listed unknown display types. - Using [CF/SD card connection], you could not copy multiple folders in the CF/SD card. 7-2 Display Unit (Runtime) - On starting the SP5000 series (open box), sometimes all levels on the EZ Tower Light flashed red and emitted the buzzer. - On the rare occaion, repeated touches caused WinGP operation to freeze. - Changing to offline menu may not work. = V4.03.100 =================================================================== 7-1 Editor (Editor) - If you registered addresses in the Enhanced Recipe Group, these addresses appear as used in the address setting workspace even after the enhanced recipe group is deleted. Clicking the reference link for one of these deleted addresses caused GP-Pro EX to exit unexpectedly. - On importing CSV files as recipe data, elements that exceeded the upper limit were imported as invalid data. - Comparing the same project set up with headers or footers on base screens caused the comparison result to be [Different]. - Convert Resolution did not convert labels on parts properly. - When [Alarm Action] was [Address], [Display Direction] was [Right], [Left] or [Bottom], and the shape was not the default, icons for upper and lower limits defined in the [Alarm Settings] did not display properly on the display unit. - If you use any application other than GP-Pro EX to create alarm messages, then copy and paste these messages into GP-Pro EX alarms, modifying the message could cause GP-Pro EX to exit unexpectedly. - On selecting [PROFIBUS international], GP-Pro EX occasionally exited unexpectedly. 7-2 Display Unit (Runtime) - On very rare occasions, changing to offline mode distorted the screen froze operations. - On the SP5000 series Power Box (SP-5B10), viewing a file on a SD card or USB storage in the File Manager displayed an invalid value for the file's timestamp. - On the SP5000 series Power Box (SP-5B10), GP4000 series (except GP-4100 series), and the LT 4000 series, performance for saving sampling data to CSV was poor. - Continuously using the EZ Tower Light caused WinGP operations to cease. - Transferring a project to WinGP failed when WinGP was installed on any drive except C drive and the C drive's write filter was enabled. - Changing the display unit to offline or transfer mode while running Pro-Server EX's data transfer feature caused the display unit to freeze. - On the GP-4000 series (except GP-4100 series, GP-4201TM, and GP-4301TM), if you turned OFF the display unit just as the display unit was powering up and about to show the initial screen, on very rare occasions project data on the display unit was erased, requiring you to transfer the project again. - Previously, connection passwords could use language dependent symbols. - On very rare occasions, writing to the SD card failed on GP-4000 series (except GP-4100 series, GP-4201TM, and GP-4301TM). - Nesting base screens and keyboard screens 10 levels or more could cause shifting of the display position of parts. - On the SP5000 series Power Box (SP-5B10), performance for editing label names in enhanced recipes was poor. 7-3 Pro-face Remote HMI Server - While the application was being distributed, restarting the Remote HMI Server prevented the client from connecting to the application screen. - Even though clients could connect using fixed paths only, the [Distribution Settings] screen's [Application] field accepted relative paths. = V4.03.000 =================================================================== 7-1 Editor (Editor) - When editing a project with limited free disk space, the project failed to save. Then, you were unable to open the project. - PS/PE-4*00 projects showed the resolution as [1600 x 1200 pixels (UXGA)], regardless of the selected screen size. - Copying and pasting an Enhanced Recipe Group would either paste incorrect data or cause the editor to stop working. - On GP3000 Series (excluding GP-3200 series) or GP4000 Series (excluding GP4000M series and GP-4100 series), if you transferred from the display unit to external storage backup data that included image fonts, and then you ran the [Memory Loader] - [Create Project] command using the backup data, the process would continue indefinitely. - When the project used many addresses, Simulation occasionally failed to launch. - Addresses with bit length of 32 bits would appear as 16 bits in simulation. - When you used the Project Converter then ran the Comparison Tool on the project without saving in GP-Pro EX, the Comparison Tool stopped working. - Comparing a project before V3.0 with a project V3.0 or later, the Comparison Tool would display differences even though there were no differences in the editor. - When using the CANopen driver on LT4000 Rear Module Series, the I/O screen and IEC address's ID number would appear as [2] instead of the correct value of [0]. 7-2 Display Unit (Runtime) - Sometimes the system menu did not display on SP5000 (Power Box), PremiumDisplay (SP5500TP / SP5600TP / SP5660TP / SP5700TP). - When the Data Display's data type was BCD with scale display ON, the scaled value was incorrect. - On the OpenBOX, saving any settings from the offline menu would disrupt communication on COM2. - Connecting the OpenBOX to run time version 3.60 would halt operations. - Even after disabling the WriteFilter function on the OpenBOX, sometimes the file write operation was not possible from WinGP. - On asynchronous screens, enhanced recipe list parts and enhanced recipe data list parts did not appear. - When using the LT4000M's Standard Analog I/O in combination with the CANopen master driver, after running the automatic project transfer command, Standard Analog I/O did not run. 7-3 Pro-face Remote HMI Server - On Windows 8.1, when magnifying the display to more than 100%, a part of the desktop or application screen did not distribute correctly. 7-4 Device/PLC - When reading the same tag data from an array as was referenced by a numeric display via address offset on either a window screen or previously displayed base screen, the screen would freeze. - After selecting the data type in the address input dialog box for bit screen parts, GP-Pro EX could end abruptly. - The SP5000 Series Open Box's the USB mini-B port did not work with the Pass-through function. - Starting up the Display was slowed when using the NJ series with many tag names with double-byte characters (such as Japanese). - On the SP-5B10, when there is a communication error with the PLC, although rare, operation would freeze. = V4.02.000 =================================================================== 7-1 Editor (Editor) - Simulation failed to launch on Windows 8.0. - Could not transfer project data generated by the Version Reverter and saved in the editor. - Not all settings were saved to the project after using the reverter, occasionally causing the project to run abnormally on the display unit. 7-2 Display Unit (Runtime) - The name of the box module SP5B10 incorrectly appeared as "SP5B40". - After using the offline menu to initialize user memory on the SP5000 (Power Box), on restart the unit would start up in Transfer mode. - After transferring the project via USB startup on the GP4000M series, using the Japanese (FEP) keypad caused an error message to appear. - When using the enhanced recipe feature to send recipe data from the display unit to external devices, there were instances when display unit operations froze. - Running [Copy Recipe] in enhanced recipe parts did not copy the [Security level]. - Using filing and enhanced recipes at the same time froze the display unit. - After entering the password or user ID in the security screen, the display unit would freeze. - Immediately after using a USB mini-B cable to download to the SP5000 series (Open Box), detaching the USB mini-B cable from the Open Box would cause it to freeze. - After stopping and then resuming the logic, analog input and temperature input did not always start back up. - After automatically transferring the project, there were instances when the updated CANopen configuration did not download to slave units. - The SP5000 (Power Box) would freeze if it changed to online mode in the middle of screen distribution. 7-3 Pro-face Remote HMI Server - When a client tried to reconnect with the server, the client showed the error message "Received an invalid packet" and the client failed to connect. = V4.01.000 =================================================================== 7-1 Editor (Editor) - When using the STD4S driver on the LT4000 series and you set the [2 Phase Counter] to [0-Preload], even if you turned OFF [Synchronize Output], an error (RGEE101) occurred if you changed the preload value. - When you set the [Window Type] to [Word Action] and saved the project, restarting the screen editor and reopening the project reverted the [Window Control Address] to its default value. - When the interface language was Japanese, Korean, Simplified Chinese or Tranditional Chinese, page breaks were in the wrong spots, causing blank pages. - When you made subroutines with many steps, the logic program editor's performance would degrade. 7-2 Display Unit (Runtime) - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM), when you displayed historical data and showed the cursor, the graph display was abnormal. - The simulation function in GP-Pro EX V4.0 had high CPU usage. - On the SP5000 series Open Box (SP-5B40), the screen distorted when changing to offline mode. - On the SP5000 series Open Box (SP-5B40), when you set advanced display in the project data settings and premium display for the display module, either the screen did not display as a full screen, or the screen's right or bottom side extended beyond view. - Just at the moment you ran a screen capture, if the unit changed to offline or transfer mode, the run time would freeze. 7-3 Device/PLC - D-Script memory copy (from PLC to display) copies only the first address point in [Symbol] mode. - Reading STRING symbols results in error in [Symbol] mode. - Use of offset may cause a text display to read data from a wrong address in [Tag] mode. - Data in TOD and DT arrays may not be displayed properly in [Tag] mode. - GP-Pro EX may abruptly be terminated if nodes in [Tag] mode and ones in [Symbol] mode are mixed in one project. - Reading STRING symbols with more than 1414 characters in total in one screen may result in error. - Pro-Server EX allows tag data to be created and edited which can lead to a mismatch with tag data in GP-Pro EX projects. - Send monitor command when shuddown the path throgh evenif setting don't use monitor command. - Couldn't display odd elements of String variables on Omron PLC NJ in the Data Display. = V4.00.000 =================================================================== 7-1 Editor (Editor) - When a project included base screens set up with parts that referenced other base screens, moving or copying parts took longer than expected. - When running Online Monitor over a network, the connection failed and showed error "Code=8". - In the Address workspace, double-clicking the [Feature], [Location], or [Screen] column reverted the list to its default sort settings. - The Parts Toolbox and Shape Browser showed 65,535 colors instead of 65,536 colors. - When working with a LT4000 series project with an Italian, Chinese (Simplified) or Korean interface, an error appeared during error check even though there were no errors in the project. - An incorrect warning message displayed when the text table language did not match the parts and common settings using the text table. - Even if function block instructions exceeded the limit, there was no error at error check when [Share Local Variables in Function Blocks] was set to do not share. - [Semicircle Graph] did not display correctly, when the display unit's [Orientation] was [Landscape]. - The blink setting was available even though the display unit did not support blink. - If you sorted by all the items in the [Recipe Group] element list, ran [Undo] or [Redo], and then removed an element, the application ended abruptly. - You could not use the keyboard to assign a Timer variable, Counter variable, or PID variable to an instructions's input or output operand. - When you saved a project with GP4201TM(Modular Type) to version [V3.00 - V3.01], you could not open the project in the associated version of GP-Pro EX. - When you saved a project with GP-4301TM(Modular Type) and [Enable Ethernet Multilink] to version [V3.00 - V3.01], sometimes opening the project in the associated version of GP-Pro EX disabled [Enable Ethernet Multilink]. - Even though you were not supposed to be able to save a GP-4201TM(Modular Type) or GP-4301TM(Modular Type) project set up with tag data on its PLC/Device to version [V3.00 - V3.01], the save operation may have run. - When running [Compare Project], some of the differences in the [Text Table] settings appeared as [Exclusive Screen] differences. - After running [Reduce Images to 16-Bit Colors] on an image part set to 16,777,216 colors, running [Transfer Project] caused an error message to display. - There were cases when you could not convert sampling groups associated with a historical trend graph that was grouped with other objects. 7-2 Display Unit (Runtime) - After saving a project without changing any offline mode settings, there were some differences when compared with a project with the same settings. - After initializing SRAM from the WinGP offline menu, an error occasionally occurred when running CF->SRAM Transfer or SD->SRAM transfer. - On the LT3300 series and GP3300 series (except for GP-3310, GP-3360), the [Main Unit]-[Ethernet Local Settings] did not show the MAC address correctly. - When real-time printing of the alarm setting is enable ,if it shifts to offline mode after alarm generating, operations would freeze. - When security was enabled, you could not use Internet Explorer to access the FTP server. - When using image fonts in a picture display, running the [Clearing action] occasionally erased area outside the picture. - The mark display was occasionally distorted when two or more picture displays showed mark images on the same screen. - On the GP-4201TM or GP-4301TM, when you used a picture display to move a mark, occasionally after-images remained of the mark in its original position. - Updating unregistered fingerprint data appeared as a normal operation when it should have been an error. - After using the Transfer Tool to download Memory Loader backup data, comparison showed differences between internal data and storage. - When the write filter setting was enabled and you tranferred to WinGP, on restarting WinGP, it started in transfer mode. - Project transfer failed after you disabled the write filter setting while WinGP was running. - Operations would freeze when transfering a project while there was a Pro-Server EX data transfer error. - Editing or saving the CSV file in the CSV display occasionally changed the CSV file name. - Running the SD->SRAM transfer command from the offline menu occasionally added invalid content in the operation log. - The first time after a screen change the message display showed correctly, but messages did not update. - On the LT4000 series with the STD4S driver, even though you ran the PCHQ (pulse catch input clear) instruction, it occasionally did not clear the status of the pulse catch. - On the LT4000 series with the STD4S driver, even though you ran the HSCQ (stop high-speed counter) instruction, it occasionally did not change the status of the high-speed counter. - On the LT4000 series with the STD4S driver, after the special I/O parameter error's system variable (#L_ExIOSpParmErr) showed an error status, you were unable to change it back to normal status. - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM) the date/time would reset to "2000/00/00 00:00:00". - On the GP4000 series (except for GP-4100 series, GP-4201TM, and GP-4301TM), when the SD card was not mounted and the SD Card Free Space (Memory Card Setting) was enabled, for 5 seconds after booting, the date and time showed "2000/00/00 00:00:00". - When there are frequent communication errors with the PLC, although rare, operations would freeze. - On WinGP, when the save destination for historical data was a folder and the free disk space was zero, an error message did not appear even though backup data could not save. 7-3 Device/PLC - The Wait To Send time observed in communication may not be the same as the value which has been set in the Wait To Send parameter. - For a connection with multiple NJ Series which share the same Tag Data, Numeric Data Displays do not display the correct PLC data. - On startup of the display unit, an SIO Error may occur rarely. - A Timeout Error may occur. - When the "Reference / Channel" is set to a value other than 0 in the Device-Specific Settings, communication does not work. - Depending on the connection configuration, part of the Equipment Module Tag Data that is listed in the Connection Manual is not imported. ================================================================================ Copyright (C) 2014 Digital Electronics Corporation. All Rights Reserved. "The Terms and Conditions of Software License Agreement" of Digital Electronics Corporation do not apply to Adobe Systems products. All product names in this document are registered trademarks or trademarks of their respective owners. Pro-face is a registered trademark of Digital Electronics Corporation in Japan, U.S.A., Canada, Europe and other areas and countries. No part of this document may be used or reproduced without permission. **************************** End of Release Note *****************************