******************************* GP-Pro EX V2.2 ******************************* September 2008 Digital Electronics Corp. Preface [Fixed defects] 1 Editor 2 Display Unit 3 Device/PLC 4 Project Converter 5 Win GP 6 Memory Loader Contents ================================================================================ [Fixed defects] 1 Editor (Editor) - When Data Type of Historical Trend Graph was set to "32 Bit Bin", Auxiliary Lines were not displayed. - When Orientation of GP was set to Portrait, new registration to Part Shape caused the part to be rotated to the right by 90 degrees. - Changing the resolution of a Project file with Picture Displays caused the file size to be increased. - Error check conditions for Input Displays had an error. - When Editor was used on German OS, certain characters could not be entered in the D-Script editor. - When a project file and a project-converted file that had been created using the old version were opened in GP-Pro EX, the needle of the meter graph was not displayed. - When a WinGP (PC/AT) model was selected, the maximum window size was 1024x768. - GP-3302B had a feature that could not be set. - In Monitor Step, Symbol Variable comments were not displayed. - Printing with Editor's Print feature caused a forced termination of Editor. - When the online editing was performed using the project created with the old version, the displays were different between a GP unit and a monitor. (I/O Driver) - When Chinese (Simplified/Traditional) was set for the language of GP-Pro EX and pressed OK in the network configuration of CANopen editor etc., an error dialog was displayed instead of a progress bar with the message, "Please wait..." in some cases. 2 Display Unit (Runtime) ===============================V2.21.05================================= - When Plate Color was set to Transparent, data could not be entered. ===============================V2.21.04================================= - Using the Save Data feature to attempt to save alarm history data might cause the GP to freeze during the transition to the offline mode. - The same active alarm was issued two or more times. - Depending on the timing of Touch, switches did not respond well. - Closing the window screen by the bit operation using the momentary switch caused the buzzer to keep sounding. - In the momentary switch with OFF Delay, a bit was turned off before the specified delay time. - When Historical Trend Graph was displayed after Sampling data was cleared, the data for the graph was not fully displayed. - Continuous typing of the historical data display switch in the historical trend graph caused the historical data display switch reverse display and the historical display status to be different. - When Screen Change was executed in GP-3300 Series(Before Rev.*-4) and LT3000 Series, the contrast control value became the maximum one. - Cyrillic could not be partly displayed in ST3000 Series and GP-3200 Series. - In the offline screen, initialization was conducted by selecting "Initialization Menu" and then "Initialize User Memory". When the progress status bar in the initializing dialog reached approximately 90%, the screen display became abnormal. - In the initial state, a Data Display with invisible setting was displayed momentarily in some cases. - When a Data Display was made invisible, its border remained visible in some cases. - Objects that were rotated with Rotation Animation occasionally returned to their original positions. - Placing a visible animation in a data display that had been set to an indirect address caused the plate color to appear in an incorrect color immediately after the screen change. - On the front layer, designated input orders did not work in some cases. - When Font Types of Input Display and Text Display were different, characters displayed in the Input Display ran over the display area in some cases. - In Alarm Display with Float setting, judgment for Alarm did not work properly in some cases. - When two or more types of parts among Data Display, Sampling Display and CSV Display were combined and placed in the same screen, the later-placed display data was not displayed normally. - Editing the text in Text Display caused the display unit to freeze. - Changing screens during the data edit in Sampling Data Display caused the display unit to freeze. - On a screen with Animation set up, Image Font could not be displayed in some cases. - Switches on System Menu did not work in some cases. - When Margin was set up, displays of device addresses ran over the display area for them in some cases. - When an indirectly specified window was called to the screen and was displayed, the display position was different from that on GP2000 Series and earlier models. - Executing Movie while Event Recorder was in operation caused the Movie to fail to run after that. - After Change Keypad was performed, switch operations before the keypad change were not cleared out in some cases. - Data copied to databuf by using the _ldcopy function might include invalid data. - Failure in writing from Pro-Server EX to CF card might cause the transfer to fail. - Registering multiple drivers in GP-Pro EX and setting one other than "Device/PLC 1" for Ladder Monitor caused a start failure of the Monitor and displayed the message, "It failed to load the Ladder Monitor." 3 Device/PLC - When KV-700/1000 series was selected, the address input ranges for Output Relay/Input Relay/Internal Relay were limited to 00000 to 09915. - When KV-700/1000 series was selected, the address input ranges for Output Relay/Input Relay/Internal Relay were limited to 00000 to 09915. 4 Project Converter - In GP-Pro/PBIII for Windows: When a project including a blank text screen with a multi language was converted and then opened using Editor, GP-Pro EX shut down. - When "GP-2501S" was specified for "Display" and a project was converted, an inappropriate color setting was enabled. 5 Win GP - Copying project data by using Project Copy Tool occasionally caused Alarm History data to get garbled. - When WinGP started on Windows Vista and shifted into the offline mode, "Windows Longhorn" was displayed for the OS version.