 |
| PS
Series |
|
|
| > PS
Series Type-A > PS-3700A (Pentium®4 model)
RAS/System Monitor Update Module |
|
|
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
- Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
- Who, uses or plans to use SEJH's products, may download and use any file.
- Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
- This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
- Please use this service at your own risk.
- If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
- Files are subject to deletion, or modification of the contents or specifications without notice.
- Please confirm that the downloading file size completely accords
with the download file size shown.
- If the file sizes do not match, delete the file without decompressing and then download the same file once again.
|
Note:
| - |
To use this update, the previous version of the system monitor must be installed. |
| - |
This file is only for PS-3700A (Pentuim®4 model).
(Model: PS3700A-T41-ASU-P41)
Please do not use it for other models such as PS-370*A (EdenTM model). |
| - |
If the System Monitor has already been registered in the start-up menu, the error message of a double start is displayed at OS start. In that case, please delete System Monitor registered in the start-up menu. |
|
| File
Name |
PS3700AP41_SysmonUpdate20051206.exe |
| File
Size |
1,889KB |
| Unit
Name |
PS-3700A (Pentium®4 model) |
| OS |
Windows®2000,
Windows®XP |
| Description |
Contains
the RAS/System Monitor update. |
| Update
Description |
| 1. |
The following issues
were corrected: |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
Restrictions: |
| |
| - |
Administrator Authentication is required for executing SMART Monitoring. |
| - |
It is only a hard
disk connected with IDE that can
be monitored by SMART.
The state of a hard disk connected with USB or SCSI cannot be monitored. |
| - |
CF cards do not support SMART and therefore the status of CF cards cannot be monitored. |
| - |
Proper function of SMART Monitoring can not be guaranteed any manufacturer other than Digital. |
|
4.
|
This update
will make the version of PSA_SMON.EXE
1.04 --> 1.05.
If the version
of PSA_SMON.EXE is 1.05 or higher,
it is not necessary to execute this
update.
The file exists in C:\Proface\Sysmon folder.
Version information can be checked by referring to version in file properties. |
|
|
|
About RAS/System Monitor
For details, please read the following PDF:
Manual PDF (3,806KB) |
|
Installation (This file is self-extracting.) |
| 1. |
Downloading "PS3700AP41_SysmonUpdate20051206.exe"
Click on "PS3700AP41_SysmonUpdate20051206.exe"and download the data to the desired folder on your PC.
| * |
If the update module cannot be downloaded to the PS-3700A unit, please download temporarily to the another PC, and copy the module to the PS-3700A unit where you want to install the module. |
|
| 2. |
Exit System Monitor if it is running. |
| 3. |
Double-click the downloaded file "PS3700AP41_SysmonUpdate20051206.exe". |
| 4. |
Update starts automatically. |
| 5. |
Reboot the system after installation. |
|
|
| Update History |
| [January.26,2006] |
| 1. |
The following issues were
corrected: |
| |
| - |
Increases in memory usage of the System Monitor increases. |
| - |
The processing of System Monitor stopped while displaying a message of remote RAS communication error. |
| - |
When there were two or more network devices, it becomes Auto even if the first device was selected by setting of remote RAS. |
| - |
When starting System Monitor Propenty again, error action of WDT could be set even if Reset was enabled. |
|
| 2. |
With this update,
applications with the following version are
provided. |
| |
PSA_SMON.EXE
Ver.1.04 --> 1.05 |
|
| [September
22, 2005] |
| 1. |
The following issues were corrected: |
| |
| - |
When System Monitor
started in Windows(R)XP, the icon is
not registered in
the task tray. |
|
| 2. |
The following
settings were added: |
| |
| - |
An error pop up message
displayed again. |
| - |
The text of the error
pop up message was changed to red. |
| - |
The SMART monitoring function
support latest HDD. |
|
| 3. |
With this update,
applications with the following version are
provided. |
| |
PSA_SMON.EXE
Ver.1.03 --> 1.04 |
| [Feb.15,
2005] |
| 1. |
The following settings were
added: |
| |
| - |
Hard Disk is monitored
by Hard Disk SMART function. |
| - |
System Monitor is set
to start automatically when OS starts. |
|
| 2. |
With this update,
applications with the following version are
provided. |
| |
PSA_SMON.EXE
Ver.1.02 --> 1.03 |
|
| |
| |
| Last Updated: January.26.2006 |
|
