Products
Download
Contact us
Back to Top

PS Series

> PS Series Type-A > PS-345xA Series > System Monitor for PS-345xA Series and Windows® 2000/XP Embedded CF card 1GB version

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • Install this system monitor in the case of the following.
  • When customers who have used the type without a preinstalled OS want to install the OS as shown in the table below
  • It is unnecessary to install this system monitor when customers have used the type with a preinstalled OS other than the one shown in "type with a preinstalled OS" below.
  • After installing this system monitor once, it is not possible to uninstall.
  • To use these installers, the Enhanced Write Filter (hereafter described as "EWF") must be set to "Protect OFF". After having set it to "Protect OFF" using EWFSettingTool, please restart your system before installing.
Title System Monitor for PS-345xA Series and Windows® 2000/XP Embedded CF card 1GB version
File Name PS345XA_PS300XB_SystemMonitor_115.exe
File Size 3,233KB
Version 1.15
Supported OS
  • Windows® 2000
  • Windows® XP Embedded
* CF card 1GB version OS only for Windows® XP Embedded.
Description This is a System Monitor for PS-345xA Series.
After installing this program, you can use the state monitor function of the hardware.
Updated Contents Ver. 1.15 (Jul. 24, 2009)
The following issue has been corrected:
・The backlight burnout error may be mistakenly detected in some cases.

The following functions have been added:
・The validated device identification function has been added.
・The threshold for CPU voltage monitoring is settable according to each CPU's specifications.
Applicable Version When customers use the following product, update is required.
-> How to confirm your Software Revision
Type with a preinstalled OS
Model Software Revision Volume Label
PS345XA-HD40-W2K-BLD [-] to [A] PS345XA2KJ1 to
PS345XA2KJ2
PS345XA-HD40-W2K/ML-BLD [-] to [A] PS345XA2KM1 to
PS345XA2KM2
XP Embedded
Model Software Revision Volume Label
PS345XA-XPE1G-JE-BLD [-] to [A] 345XAXPEJE1 to
345XAXPEJE2
PS345XA-XPE1G-ML-BLD [-] to [A] 345XAXPEM1 to
345XAXPEM2
Type without a preinstalled OS
Model
PS345XA-HD40
PS345XA-HD40-BLD

Installation (This file is self-extracting.)

  1. Click "PS345XA_PS300XB_SystemMonitor_115.exe" and download it to the appropriate folder.
  2. Double-click the downloaded file. (Any extraction destination will do.)
  3. When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
  4. Double-click the "PS345XA_PS300XB_SystemMonitor_115.exe" file that is extracted in Step 2 above to start the install.
  5. Complete the install by following the messages on the window.
  6. Restart the panel computer.

Update History:

[Ver. 1.15] (July 24, 2009)

The following issue has been corrected.
  • The backlight burnout error may be mistakenly detected in some cases.
The following functions have been added.
  • The validated device identification function has been added.
  • The threshold for CPU voltage monitoring is settable according to each CPU's specifications.

[Ver. 1.13] (Mar. 6, 2008)

The following specification has been fixed.
  • The task tray icons might not be changed successfully.
The following specification has been changed.
  • The [Close] button in System Monitor GUI has been deleted.

Last Updated : July 24, 2009
Posted : Mar. 6, 2008

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.