Products
Download
Contact us
Back to Top
 PL Series
 > PL-X920 Series  > Windows®98 /WindowsNT® /Windows®2000 / Windows®XP Hard Disk Driver Update

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download
--Caution--
- Please do not install this update if you are using the software mirroring utility PL-SM900.

File Name iaa23_multi.exe
File Size 5,629KB
Unit Name PL-X920 Series
OS Windows®98 /WindowsNT® /Windows®2000 /Windows®XP
Description Latest version of the Hard Disk Driver for PL-X920 Series Windows®98 /WindowsNT® /Windows®2000 /Windows®XP
Update Description
1. The following content is corrected:
- The defect that hard disk sometimes stops in spite of Windows power saving setting is modified.

Models to be updated are listed below.
 
Hard Disk Type Hard Rev. Soft Rev. Volume Label
PL-HDX920-W2K/ML None None PLX9202KM01
PL-HDX920-W2K/ML A A PLX9202KM02
PL-HDX920-W2K/ML B A PLX9202KM02
 
CD Type
PLX920 MMCD01
PLX920 MMCD02
PLX920 MMCD03
PLX920 MMCD04

Installation and Setting of Power Saving Mode
- [When using Windows®98/Windows®2000/Windows®XP]
  Download the latest version of the hard disk driver from this page and upgrade the driver version.
1. Download the above file "iaa23_multi.exe" to the desired folder.
 
* If the update module cannot be downloaded to the PL-X920 unit, please download temporarily to the another PC, and copy the module to the PL-X920 unit where you want to install the module.
2. Double-click on "iaa23_multi.exe" to start the installation program.
3. Follow the installation instructions given.
4. Reboot the system after installation.
5. From [Power Management] or [Power Options] in the control panel of Windows, set the [Turn off hard disks] option to "After 5 mins".
- [When using WindowsNT®]
  WindowsNT® does not include the hard disk power control function. Select [BIOS SETUP] – [Power Management setup] – [HDD Power Down] to turn off the hard disk power supply when the hard disk is not being used. It is recommended to set the power down time to "5 Min".

--Notices--
[When using the software mirroring utility PL-SM900]
  When using the software mirroring utility PL-SM900, do not install the latest version of the hard disk driver (Intel Application Accelerator). In addition, the System Monitor should be activated in order to turn off the hard disk power supply.
When the Rev. of the PL-SM900 is either "Rev.None" or "Rev.A", download the latest version from here and upgrade the PL-SM900.
When using "Rev.B" or later, you are not required to upgrade.
 
- [When using Windows®2000/Windows®XP and PL-SM900]
 
1. From or [Power Options] in control panel of Windows, set the [Turn off hard disks] option to "After 5 mins".
2. Start the System Monitor.
 
- [When using WindowsNT® and PL-SM900]
 
1. Activate the System Monitor Property, and open the [Mirror] tab.
2. Set the “Turn off hard disk” option to “5 min”, and then click the [OK] button.
3. Start the System Monitor.

Last Updated: April 20, 2005
| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.