Products
Download
Contact us
Back to Top

PL Series

>PL3000 Series >APL-SM3000 Software Mirroring Utility

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

  • In order to use this update, the APL-SM3000 Software Mirroring Utility must be installed.
  • Windows® XP Embedded users need to set the write filter to “Protect OFF” by using EWFSettingTool and then restart the system before the installation.
Title APL-SM3000 Software Mirroring Utility
File Name APL-SM3000_Update_400.exe
File Size 2,305KB
Version 4.00
Supported OS
  • Windows® 2000
  • Windows® XP
  • Windows® XP Embedded
Updated Contents Ver. 4.00 (Jun. 13, 2011)
The following issue was corrected:
  • A problem in the retry processing during the error occurrence has been fixed.
  • Measure related to Intel AHCI Errata (Processing to recover from TFES was added.)
With this update, driver file versions change into 1.02b.
Driver File
C:\WINNT\system32\drivers\smsata.sys (Windows® 2000)
C:\WINDOWS\system32\drivers\smsata.sys (Windows® XP/Windows® XP Embedded)
Version information can be confirmed via the [File | Properties] menu.
Applicable Version When customers use the following version, update is required.

APL-SM3000
Revision Label notation of the installation CD
[-]

APL-SM3000-01

[A]

APL-SM3000-02

[B]

APL-SM3000-03

Installation (This file is self-extracting.)

  1. Click "APL-SM3000_Update_400.exe" and download it to the appropriate folder.
  2. Double-click the downloaded file. (Any extraction destination will do.)
  3. When [OK] is clicked, the file is extracted. (If the same name file has already existed, it is overwritten.)
  4. Double-click the "APL-SM3000_Update_400.exe" file that is extracted in Step 2 above to start the install.
  5. Complete the install by following the messages on the window.
  6. Restart the panel computer.

Update History:

[Ver. 4.00] (Jun. 13, 2011)

The following issue was corrected:
  • A problem in the retry processing during the error occurrence has been fixed.
  • Measure related to Intel AHCI Errata (Processing to recover from TFES was added.)

[Ver. 2.00] (Mar. 28, 2008)

New

Last Updated : Jun. 13, 2011
Posted : Mar. 28, 2008

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.