Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
Mouse emulation software (former PL-TD000).
Touch operation enabled by installing this software
System Environment
Windows NT® Service Pack6a
Windows® 2000 Professional
Windows® XP Professional
However, for PL and PS Series, it depends on OS.
Others
- Communication method with a touch panel is either USB or serial communication. Please refer to Table 1 for the factory default setting of each model.
When using the GP3000 with a VM unit installed on, the USB communication is not supported.
- The following symptoms will occur when the mouse emulation software is used by the serial cable connection of GP3000 + Option unit (VM unit and DVI unit) and FP2000 series.
- Touch operation does not operate.
- Select and activate "START" -> [Program (P)] -> [UPDD] -> [Control setting]. See [Status] tab, [Init State] is "Time Out".
In this case, it will operate by removing "Initialize" check item in [Advanced] tab.
How to Install (This file is self-extracting.)
Click on the link “UPDD_30846P.EXE” in the box above to download the file to the desired folder.
After the download is finished, double-click on the “UPDD_30846P.EXE” file to decompress it.
Double click “Setup.exe” in the folder created after decompression for installation.
In installing, [Selecting the controller] is displayed for setting communication method with touch panel.
When the method is serial communicaiton, choose “Digital, TSC-1310D Series Serial”, and “Digital, TSC-1310D Series USB” for USB.
Please refer to Table 1 for communication method for touch panel of each model.
Table 1. Communication Method with Touch Panel
Model Name
Communication Method with Touch Panel
Default setting
How to change Serial <--> USB
PL-5900 Series
Serial
(COM4)
Cannot be switched
PL-5910 Series
Serial
(COM4)
Change Touch Panel I/F Selector Switch in the Front Maintenance Cover.
PL-X920 Series
Serial
(COM4)
Change Touch Panel I/F Selector Switch in the Front Maintenance Cover.
PL-X930 Series
USB
Change Touch Panel Changeover Switch placed on the board inside of the unit.
PS Series
A type
PS-3710A
USB
Change Touch Panel Changeover Switch placed on the board inside of the unit.
PS-3711A
USB
Cannot be switched
PS-3700A
USB
Change Touch Panel Changeover Switch placed on the board inside of the unit.
PS-3701A
USB
Cannot be switched
PS-3650A/3651A
USB
Cannot be switched
PS-3450A/3451A
USB
Cannot be switched
FP2000 Series
Serial
Change Dip Switch located behind the Dip Switch Cover.
FP3000 Series
Serial
Change Dip Switch located behind the Dip Switch Cover.
UF7811 Series
Serial
Change Dip Switch located behind the Dip Switch Cover.
GP3000 Series + VM/DVI Unit
(GP3000-VM01, GP3000-DVI01)