Contact us
Back to Top

FP Series

>FP5000 Series >FP5000 Utility (English)

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.


  • When this driver is installed for Windows Embedded of Pro-face products, please be sure that the Write Filter is disabled. We recommend that you re-enable the Write Filter after installation.
  • Be sure to connect FP5000 when you install this software.
Title FP5000 Utility (English)
File Name
File Size 72,018KB
Version 1.00.0013
Supported OS
  • Windows® XP 32-bit
  • Windows® 7 32-bit/64-bit
  • Windows® 8 32-bit/64-bit
  • Windows® Embedded Standard 2009 for Pro-face products *1
  • Windows® Embedded Standard 7 for Pro-face products *1

*1 For supported models, contact your local distributor.
Description The is the utility that displays icons to configure settings on FP5000 with convenient touch operation. (The installer language is a English.)

How to install

  1. Download the utilities onto the host.
  2. From the folder containing the downloaded utilities, open Drivers → Utilities.
  3. Run setup.exe, and follow the on-screen instructions to install the utilities.
    NOTE: To use these utilities, MicrosoftR.NET Framework is required. If MicrosoftR.NET
    Framework is not installed on your host, follow the on-screen instructions to install it.
  4. Click Finish to complete the installation.

Update History:

[Ver. 1.00.0013] (Mar. 25, 2016)

  • The issue of touch operation was fixed when the angle of the display is 90 degrees or 270 degrees.
  • Change touch operation to start Launcher for Windows 7, 8. The 1st touch point was fixed to left top of screen. It depends on rotation angle of screen.

[Ver. 1.00.0011] (Sep. 18, 2015)

Fixed version

[Ver. 1.00.0010] (Aug. 7, 2015)

Fixed version

[Ver. 1.00.0009] (Jun. 15, 2015)

Fixed version

[Ver. 1.00.0008] (May. 15, 2015)

Fixed version

[Ver. 1.00.0007] (Nov. 18, 2014)


Last Updated : Mar. 25, 2016
Posted : Nov. 18, 2014

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.