Products
Download
Contact us
Back to Top

Driver Download

>Industrial robot >YASKAWA Electric Corporation High Speed Ethernet Server Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title YASKAWA Electric Corporation High Speed Ethernet Server Driver
Version Ver. 1.13.06
File Name YAS_BESV.exe
File Size 765KB
Supported Software The required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
You can check your version by ”Help” function -> ”Version Info”.
Supported Devices
  • DX100 Series
  • DX200 Series
  • FS100 Series
  • FS100L Series
Supported Models Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.

Model Required driver version
GP3000 Series Ver. 1.12.03 or later
LT3000 Series Ver. 1.12.03 or later
GP4100 Series (GP4104) Ver. 1.12.03 or later
GP4000M Series Ver. 1.12.03 or later
GP4000 Series Ver. 1.12.03 or later
LT4000M Series Ver. 1.12.05 or later
SP5000 Series Ver. 1.13.05 or later
IPC Series for WinGP Ver. 1.12.03 or later
General PCs for WinGP Ver. 1.12.03 or later
Device/PLC Connection Manual For details, please read the following
PDF:yas_besv.pdf (493KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content Ver. 1.13.06 (Apr. 16, 2015)
The following issue was fixed.
  • Repetitive file reading with File Read class (0x4C0) into memory could cause display to stop communication.

How to install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installation, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX.
  6. Select [YASKAWA Electric Corporation] for "Manufacturer" and [High Speed Ethernet Server] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual above (PDF file).
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.13.06] (Apr. 16, 2015)

The following issue was fixed.
  • Repetitive file reading with File Read class (0x4C0) into memory could cause display to stop communication.

[Ver. 1.13.05] (Oct. 17, 2013)

The following settings were added.
  • DX200 series was supported.
  • FS100L series was supported.

[Ver. 1.12.05] (Sep. 21, 2012)

The following bug has been fixed.
  • When the File Read Class (0x4C0) is used and a file is created into the route folder of the SD card in GP-4000 series, an existing file cannot be overwritten with the same file name and an error occurs.

[Ver. 1.12.04] (Jul. 5, 2012)

The following bug has been fixed.
  • When a File Control command is used, the Display may hang up.

[Ver. 1.12.03] (Jun. 4, 2012)

The file is released.

Last Updated : Apr. 16, 2015
Posted : Jun. 4, 2012

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.