Contact us
Back to Top

Driver Download

>Industrial robot >DENSO WAVE INCORPORATED b-CAP Protocol (TCP) Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.


Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Version Ver. 1.15.14
File Name DSW_BCAP.exe
File Size 1,027KB
Supported Software GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
You can check your version by ” Help ” function -> ” Version Info ”.
Supported Devices
  • RC7M Controller
  • RC8 Controller
Supported Models
  • GP3000 Series
  • LT3000 Series
  • GP4100 Series (GP4104: GP-Pro EX Ver. 2.70.000 or later)
  • GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
  • GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
  • IPC Series for WinGP
  • General PCs for WinGP
Device/PLC Connection Manual For details, please read the following
PDF:dsw_bcap.pdf ( 777KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents Ver. 1.15.14 (Feb. 27, 2013)

How to install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX/Pro-Server EX.
  6. Select [DENSO WAVE INCORPORATED] for "Manufacturer" and [b-CAP Protocol(TCP)] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
When using the driver, be sure to refer to the Device Connection Manual above (PDF file).
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.15.14] (Feb. 27, 2013)


Posted : Feb. 27, 2013

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.