Products
Download
Contact us
Back to Top

Pass-Through

Pass-Through Function >Pass Through Function Installer

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

Precautions for adding a new driver onto Windows Vista or later
Precautions for adding a new driver at Daylight Saving Time

Title Pass Through Function Installer
Version Ver. 1.04.12
File Name Setup.exe
File Size 10,263KB
Applicable Software GP-Pro EX Ver. 2.10.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Compatible OS
  • Windows XP 32bit OS (Service Pack 2 or later)
  • Windows Vista 32bit OS (any Service Pack, any edition)
  • Windows 7 32bit/64bit OS (any Service Pack, any edition)
  • Windows 8.0 32bit/64bit OS (any Service Pack, any edition)
  • Windows 8.1 32bit/64bit OS (any Service Pack, any edition)
  • Windows 10 32bit/64bit OS (any Service Pack, any edition)
Related Units Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required Pass Through Function versions for different models are listed below.
Model Pass Through
Required tool version
GP3000 Series Ver. 1.00.00 or later
LT3000 Series Ver. 1.00.00 or later
GP4100 Series (GP4104) Ver. 1.01.07 or later
GP4100 Series (GP4114) Ver. 1.04.10 or later
GP4000M Series Ver.1.01.07 or later
GP4000 Series Ver. 1.01.08 or later
LT4000M Series Ver. 1.02.08 or later
SP5000 Series Ver. 1.03.08 or later
IPC Series for WinGP Ver. 1.00.05 or later
General PCs for WinGP Ver. 1.00.05 or later
Manual For details, please read the following
PDF: com_psth.pdf ( 617KB )

Please refer to [Pass-Through Function] about a driver supporting.
Updated Contents Ver. 1.04.12 (Jul. 13, 2018)
The following issue was corrected:
  • Rarely failed the installation of the virtual COM driver.
Notes Please refer to “Troubleshooting for Pass Through Function Installer”.

Installation (This file is self-extracting.)
Prior to installation, be sure to close all software applications that are running.

  1. Click on the above file name to download the data to desired folder.
  2. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  3. Follow the instructions given.
  4. After installation, please restart the computer.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Update History:

[Ver. 1.04.12] (Jul. 13, 2018)

The following issue was corrected:
  • Rarely failed the installation of the virtual COM driver.

[Ver. 1.04.11] (Dec. 16, 2016)

The following settings were added:

[Ver. 1.04.10] (Apr. 8, 2016)

The following settings were added:

[Ver. 1.01.07] (Dec. 7, 2009)

The following settings were added:
  • Supported GP4100 Series.
The following issues were corrected:
  • When the safety remove USB driver during Pass-Through connection, the application error is occurred.

[Ver. 1.00.06] (Jun. 4, 2009)

The following issues were corrected:
  • For use with an Ethernet connection, pressing "Config" or "Delete" button while connecting to a display unit nonexistent in the network (waiting status for timeout) may cause the Pass-Through Configuration Tool to be inoperative.
  • For an Ethernet connection, if the Ethernet cable is disconnected during a search for a display unit, the Pass-Through Configuration Tool may get an application error.
  • Cannot connect with PLC when using Mitsubishi Electric Corporation A Series CPU Direct driver.

[Ver. 1.00.04] (Aug. 28, 2008)

The following OS was supported:
  • Windows Vista
The following issues were corrected:
  • The computer freezes when shift to Standby, Sleep or Hibernate at the time of Pass-Through function use.
  • Pass-Through Configuration Tool freezes when search them again while searching display(s).
  • The same display is found several times when search display on the computer which use plural ethernet cards.

[Ver. 1.00.03] (May. 29, 2008)

The following issues were corrected:
  • When computer has plural network cards, a forced case to be finished has Pass-Through Configuration Tool.
  • The indication by the English OS had omitted character(s).

[Ver. 1.00.02] (Apr. 8, 2008)

The following issues were corrected:
  • The computer froze during the installation of the virtual COM driver.
  • When start Pass-Through Configuration Tool and DDE client at the same time, DDE client does not work normally.
  • When GP connected by Pass-Through function shifted to Offline-Mode, the connection of the Pass-Through function does not recover.

[Ver. 1.00.01] (May 31, 2007)

  • Possible to install Virtual COM Bus Driver / Virtual COM Port Driver in a system than this installer.
  • Possible to set the number of Virtual COM Port(s).
  • Modified detect that cannot use other COM ports for by user authority except Administrator authority when installed a Virtual COM Bus Driver.

Last Updated : Jul. 13, 2018
Posted :May. 31, 2007

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.