Products
Download
Contact us
Back to Top

Driver Download

PLCs > YOKOGAWA Electric Corporation Personal Computer Link Ethernet driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
  2. Who, uses or plans to use SEJH's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title YOKOGAWA Electric Corporation Personal Computer Link Ethernet driver
Version Ver. 1.15.04
File Name YOK_LETH.exe
File Size 824KB
Supported Software GP-Pro EX Ver 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
You can check your version by "Help" function -> "Version Info".
Supported Devices FA-M3 Series
Supported Models
Device/PLC Connection Manual For details, please read the following
PDF:yok_leth.pdf ( 702KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Update Content Ver. 1.15.04 (May 18, 2012)
The following functions were added:
  • Timer present value (count-up): TI device and Counter present value (count-up): CI device are supported.
  • LT3000 Series is supported.

How to install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX/Pro-Server EX.
  6. Select [YOKOGAWA Electric Corporation] for "Manufacturer" and [Personal Computer Link Ethernet] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual above (PDF file). Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.15.04] (May 18, 2012)

The following functions were added:
  • Timer present value (count-up): TI device and Counter present value (count-up): CI device are supported.
  • LT3000 Series is supported.

[Ver. 1.14.04] (Apr. 6, 2011)

The following functions were added:
  • Supported the Cash Register(F device).
  • GP4000M Series is supported.
    * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.
  • GP4000 Series is supported.
    * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.

[Ver. 1.13.04]

The following function was added:
  • Support GP4100 Series.
    * To use GP4100 Series, GP-Pro EX Ver.2.70.000 or later is required.
The following issues were fixed:
  • Device name of the INF4 may not be displayed in the error message.
  • In TU device and CU device, Invalid write command may be sent.

[Ver. 1.12.03]

The following issue was fixed:
  • The system error may occur in GP-3200/ST3000 series.

[Ver. 1.12.02]

The following function was added:
  • Support for DeviceMonitor.
    * To use DeviceMonitor, GP-Pro EX Ver.2.00.000 or later is required.

[Ver. 1.11.02] (Dec. 18, 2006)

The following functions were added:
  • Supported the devices Special Module(SW), Information(INF), Program Information(PRI), User Log Read(ULR) and Error History Read(ERH).
  • Support for Pass-Through.
The following issue was fixed:
  • When the momentary switch was pressed or Bit write was executed, the lamp for which the 16-bit ahead address was allocated blinked.

Last Updated : Aug. 23, 2012
Posted : Dec 18, 2006

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Schneider Electric Japan Holdings Ltd. All Rights Reserved.