Products
Download
Contact us
Back to Top

Driver Download

>PLCs >Siemens AG SIMATIC S5 CPU Direct Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title Siemens AG SIMATIC S5 CPU Direct Driver
Version Ver. 1.15.03
File Name SIES5CPU.exe
File Size 730KB
Applicable Software The required versions of software for this driver installer are as follows.
  • GP-Pro EX Ver. 2.10.000 or later
  • Pro-Server EX Ver. 1.30.000 or later
You can check your version by ”Help” function -> ”Version Info”.
Related Devices
  • SIMATIC S5 Series
Related Units Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX. Required driver versions for different models are listed below.

Model

Required driver version

GP3000 Series

Ver. 1.10.01 or later

LT3000 Series

Ver. 1.14.02 or later

GP4100 Series (GP4105)

Ver. 1.12.01 or later

GP4100 Series
(GP4104: Ethernet
Multilink only)

Ver. 1.12.01 or later

GP4000M Series

Ver. 1.13.02 or later

GP4000 Series

Ver. 1.12.01 or later

SP5000 Series

Ver. 1.15.02 or later

IPC Series for WinGP

Ver. 1.11.01 or later

General PCs for WinGP

Ver. 1.11.01 or later

Device/PLC Connection Manual For details, please read the following
PDF:sies5cpu.pdf ( 358KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents Ver. 1.15.03 (Jun. 29, 2015)
The following issue was corrected:
  • Some DB device settings in PLC could cause communication error with Ver. 1.13.02 or later.

Installation (This file is self-extracting.)

  1. Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
  2. Click on the above file name to download the data to desired folder.
  3. After the download to your PC is finished, double-click on the file's icon to start the installer program.
  4. After the installer starts, follow the instructions given on each screen.
  5. After installation, execute GP-Pro EX.
  6. After installation, click on the Device/PLC area's [Siemens AG] selection and select [SIMATIC S5 CPU Direct].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".

Update History:

[Ver. 1.15.03] (Jun. 29, 2015)

The following issue was corrected:
  • Some DB device settings in PLC could cause communication error with Ver. 1.13.02 or later.

[Ver. 1.15.02]

The following setting was added:
  • SP5000 Series was supported.
    * To use a SP5000 Series, Ver. 4.00.000 or later of GP-Pro EX are necessary.

[Ver. 1.14.02]

The following setting was added:
  • LT3000 Series was supported.

[Ver. 1.13.02] (Nov. 30, 2011)

The following setting was added:
  • CPU945/946/947/948 are newly supported.
  • GP4000M Series was supported.
    * To use a GP4000M Series Ver. 2.71.000 or later of GP-Pro EX are necessary.
The following issue were corrected:
  • Possible failure to read correct data from IW32 and QW32 of 90U-115U series.
  • Incorrect address may be accessed if target PLCs are switched during communication.
  • A communication error may occur only once when returning from offline to online.

[Ver. 1.12.01]

The following settings were added:
  • GP4105 was supported.
    * To use a GP4105 Ver. 2.60.000 or later of GP-Pro EX are necessary.
  • GP4104 was supported.
    * To use a GP4104 (Ethernet Multilink) Ver. 2.70.000 or later of GP-Pro EX are necessary.

[Ver. 1.11.01]

The following setting was added:
  • Support for Device Monitor.
    * Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.

[Ver. 1.10.01] (Dec. 26, 2006)

New

Last Updated : Jun. 29, 2015
Posted : Dec. 26, 2006

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.