Products
Download
Contact us
Back to Top

Driver Download

>PLCs >OMRON Corporation CS/CJ/NJ Series EtherNet/IP Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.
 Download

Note:

Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title OMRON Corporation CS/CJ/NJ Series EtherNet/IP Driver
Version Ver. 1.15.04
File Name OMR_ETIP.exe
File Size 1,878KB
Supported Software GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Supported Devices
  • CS1 Series
  • CJ2 Series
  • NJ Series
Supported Models
  • GP3000 Series
  • LT3000 Series
  • GP4100 Series (GP4104: GP-Pro EX Ver. 2.70.000 or later)
  • GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
  • GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
  • IPC Series for WinGP
  • General PCs for WinGP
Device/PLC Connection Manual For details, please read the following
PDF:omr_etip.pdf ( 460KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content Ver. 1.15.04 (Sep. 5, 2013)
The following bugs have been fixed.
  • After transfer to NJ Series from a ladder tool is executed during connection with the NJ Series, communication becomes disabled.
  • When resetting the Display, turning on/off the power or project transfer is repeated, communication may be disabled.

How to Install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX/Pro-Server EX.
  6. Select [OMRON Corporation] for "Manufacturer" and [CS/CJ/NJ Series EtherNet/IP] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.15.04] (Sep. 5, 2013)

The following bugs have been fixed.
  • After transfer to NJ Series from a ladder tool is executed during connection with the NJ Series, communication becomes disabled.
  • When resetting the Display, turning on/off the power or project transfer is repeated, communication may be disabled.

[Ver. 1.15.03] (May. 14, 2013)

The following bug has been fixed.
  • The Display may hang up if PLC has a BOOL type tag in the member of structure at NJ series when using driver version Ver. 1.15.02.

[Ver. 1.15.02] (Feb. 5, 2013)

The following bug has been fixed.
  • GP cannot access BOOL type tag if it has been mapped to I/O of NJ series.

[Ver. 1.15.01] (Sep. 25, 2012)

The following settings were added:
  • LT3000 is supported.
The following bug has been fixed.
  • When a Byte array in the NJ series is used at random, a correct value may not be displayed.
  • When 83 or more variables with short character strings are continuously registered in the NJ series, an error occurs, which disables the start of communication.
  • When many variables with long character strings are continuously registered in the CJ2 series, an error occurs, which disables the start of communication.
    (Example) When 39 or more variables with 48 characters are continuously registered.

[Ver. 1.14.00] (Aug. 29, 2011)

The driver name was changed to“OMRON Corporation CS/CJ/NJ Series EtherNet/IP”
The following settings were added:
  • NJ series was supported.
  • GP4000M Series is supported.
    * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.

[Ver. 1.13.00]

The following settings were added:
  • GP4000 Series is supported.
    * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.

[Ver. 1.12.00]

The following settings were added:
  • GP4104 was supported.
    * To use a GP4104 Ver. 2.70.000 or later of GP-Pro EX are necessary.

[Ver. 1.11.00] (Jul. 29, 2010)

The following settings were added:
  • “Copy from Another Project” function is supported.
    * Ver. 2.60.000 or later version of GP-Pro EX are necessary to use “Copy from Another Project” function with this driver.
  • “Automatic allotment the address setting” is supported.
  • “Automatic match in tag address” function is supported.
  • The timing of Tag unmatched error displaying is been able to change.
  • Outputting tag collation error is supported.

[Ver. 1.10.00] (Aug. 20, 2009)New

Last Updated: Sep. 5, 2013
Posted: Aug. 20, 2009

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.