>PLCs >Mitsubishi Electric Corporation Q Series CPU Direct Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
The required versions of software for this driver installer are as follows.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later You can check your version by "Help" function -> "Version Info".
Related Devices
Q Series
Related Units
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
For details, please read the following
PDF:mit_qcpu.pdf ( 461KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.19.11 (Dec. 12, 2014)
The following setting was added:
Added High-Speed Universal Model (QnUDVCPU) to related device.
Installation (This file is self-extracting.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
After installation, click on the Device/PLC area's [Mitsubishi Electric Corporation] selection and select [Q Series CPU Direct].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.19.11] (Dec. 12, 2014)
The following setting was added:
Added High-Speed Universal Model (QnUDVCPU) to related device.
[Ver. 1.19.10] (Jul. 27, 2010)
The following setting was added:
Supported LT3000 Series.
[Ver. 1.18.10] (Jul. 14, 2010)
The following items have expanded:
Access range of Internal Relay and Link Relay for Universal Model CPU.
Access range of Internal Relay for Q172DCPU and Q173DCPU.
[Ver. 1.17.10]
The following setting was added:
Support GP4100 Series. * GP-Pro EX Ver. 2.60 is necessary to use GP4100 Series.
[Ver. 1.16.10] (Feb. 5, 2009)
The following settings were added:
Added Universal model QCPU (Q00UJCPU, Q00UCPU, Q01UCPU, Q10UDHCPU, Q20UDHCPU) to related device.
Added Universal model Built-in Ethernet port QCPU (Q03UDECPU, Q04UDEHCPU, Q06UDEHCPU, Q10UDEHCPU, Q13UDEHCPU, Q20UDEHCPU, Q26UDEHCPU) to related device via other CPU on Multiple CPU system.
Added Motion CPU (Q172DCPU, Q173DCPU) to related device.
Support to Common device for multiple CPU system (U3En).
Support to Extend data register and Extend link register.
Support to "Mitsubishi Electric Q Series PLC Ladder Monitor V1.02.00".
[Ver. 1.15.09] (Apr. 25, 2008)
The following setting was added:
Added Universal model QCPU (Q13UDHCPU, Q26UDHCPU) to related device.
[Ver. 1.15.08] (Dec. 14, 2007)
The following setting was added:
Added Universal model QCPU (Q02UCPU, Q03UDCPU, Q04UDHCPU, Q06UDHCPU) to related device.
[Ver. 1.14.08] (Nov. 29, 2007)
The following issue was corrected:
When communicating with multi CPU. The address range error is mis-detected.
[Ver. 1.14.07] (Aug. 31, 2007)
The following setting was added:
Motion CPU is supported.
[Ver. 1.13.07] (Jan. 15, 2007)
The following settings were added:
Support for Device Monitor. *Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.
Support for Ladder Monitor. *Ver. 2.00.000 or later version of GP-Pro EX and "Mitsubishi Electric Q Series PLC Ladder Monitor" are necessary to use a Device Monitor.
[Ver. 1.10.06] (Aug. 11, 2006)
The following setting was added:
Multi CPU System is supported.
[Ver. 1.10.05] (Jul. 31, 2006)
The following setting was added:
Pass-through is supported.
Last Updated : Dec. 12, 2014
Posted : Aug. 11, 2006