> PLCs >KEYENCE Corporation KV-700/1000/3000/5000 CPU Direct Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later To check your version, go to the ” Help ” menu → ” Version Info ”.
Related Devices
KV-700 Series
KV-1000 Series
KV-3000 Series
KV-5000 Series
KV-5500 Series
KV-7000 Series
KV-Nano Series
Related Units
Required versions depend on models.
Please check "Supported Models / Version" for the required versions of GP-Pro EX.
Required driver versions for different models are listed below.
For details, please read the following
PDF:key_kcpu.pdf ( 1,521KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.16.06 (Nov. 27, 2015)
The following functionalities were added.
KV-7000 Series Support
KV-Nano Series Support
Installation (This file is self-extracting.)
Please confirm that the supported software is installed in your computer. Prior to installing the driver, close all your personal computer applications, including any resident programs such as virus detection program, etc.
Click on the above file name to download the data to desired folder.
After the download to your PC is finished, double-click on the file's icon to start the installer program.
After the installer starts, follow the instructions given on each screen.
After installation, execute GP-Pro EX.
After installation, click on the Device/PLC area's [KEYENCE Corporation] selection and select [KV-700/1000/3000/5000 CPU Direct].
*
When using the driver, be sure to refer to the Device Connection Manual PDF (Shown above). Also, for general information regarding Device connection and documentation conventions please refer to "Device/PLC Connection Manual".
Update History:
[Ver. 1.16.06] (Nov. 27, 2015)
The following functionalities were added.
KV-7000 Series Support
KV-Nano Series Support
[Ver. 1.15.06] (Jul. 27, 2012)
The following functionalities were added.
LT3000 Support
USB-Serial (RS-422/485) Conversion Adapter Support
[Ver. 1.14.06] (Feb. 17, 2012)
The following issues were corrected:
If "38400" or more is specified in the pass-through function, communication may not be made normally.
When the pass-through function is used via Ethernet, connection to PLC cannot be made.
[Ver. 1.14.05]
The following issue was corrected:
A device comment cannot be transferred via the pass-through function.
[Ver. 1.14.04]
The following setting was added:
GP4000 Series were supported. * GP-Pro EX Ver. 3.00.000 or later is necessary to use GP4000 Series.
The following issue was corrected:
When the program development tool is left online for long hours in the use
of pass-through function, the communication error may occur.
[Ver. 1.14.03]
The following settings were added:
GP4000M Series were supported. * GP-Pro EX Ver. 2.71.000 or later is necessary to use GP4000M Series.
GP-4104 was supported. * GP-Pro EX Ver. 2.70.000 or later is necessary to use GP-4104 (Ethernet Multilink).
The following issue was corrected:
Reading 126 or more inconsecutive addresses of ZF device may cause a communication error.
[Ver. 1.14.02]
The following setting was added:
GP-4105 and GP-4106 were supported. * GP-Pro EX Ver. 2.60.000 or later is necessary to use GP-4105 or GP-4106.
[Ver. 1.13.02] (Oct. 16, 2008)
The following setting was added:
Support for Pass-through.
[Ver. 1.12.02] (Aug. 21, 2008)
The following issue was corrected:
When the KV-700/1000 series is selected, the address of an Input Relay / Output Relay / Internal Auxiliary Relay cannot be correctly set.
[Ver. 1.12.01] (Mar. 17, 2008)
The following settings were added:
KV-3000Series/KV-5000 Series are supported.
The driver name is changed to "KV-700/1000/3000/5000 CPU Direct".
[Ver. 1.11.01] (Oct. 31, 2007)
The The following setting was added:
Support for Device Monitor * GP-Pro EX Ver. 2.00.000 or later is necessary to use a Device Monitor.