>PLCs >GE Intelligent Platforms Series 90 Ethernet Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
For details, please read the following
PDF:gef_ethr.pdf ( 301KB )
Updated Contents
Ver. 1.14.05 (Feb. 21, 2013)
The following settings were added:
GP4104 is supported. * To use a GP4104 Ver. 2.70.000 or later of GP-Pro EX is necessary.
The following bug has been fixed.
If screen change is repeated , the data which read from PLC may not updated.
How to install (This file is self-extracting.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [GE Intelligent Platforms] for "Manufacturer" and [Series 90 Ethernet] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
*
When using the driver, be sure to refer to the Device Connection Manual above (PDF file).
Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.
Update History:
[Ver. 1.14.05] (Feb. 21, 2013)
The following settings were added:
GP4104 is supported. * To use a GP4104 Ver. 2.70.000 or later of GP-Pro EX is necessary.
The following bug has been fixed.
If screen change is repeated , the data which read from PLC may not updated.
[Ver. 1.13.04] (Sep. 14, 2012)
The following functions were added:
Maximum number of connection devices has been increased from 16 to 32.
[Ver. 1.12.04]
The following function was added:
GP4000M Series was supported. * Ver. 2.71.000 or later of GP-Pro EX are necessary to use a GP4000M Series.
[Ver. 1.11.04]
The following functions were added:
GP4000 Series is supported. * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
The manufacturer name was changed.
GP4000M Series is supported. * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.
[Ver. 1.11.02] (Sep. 18, 2007)
The following functions were added:
Support for PACSystems RX7i.
Supported to select series by user.
Device Monitor is supported. *Ver. 2.00.000 or later version of GP-Pro EX are necessary to use a Device Monitor.
Last Updated: Feb. 21, 2013
Posted : Sep. 18, 2007
