>PLCs >Fuji Electric Co., Ltd. MICREX-SX Series SIO Driver
Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.
Terms of Use
Schneider Electric Japan Holdings Ltd. ("SEJH") shall retain all intellectual property rights to the files that SEJH provides for this service.
Who, uses or plans to use SEJH's products, may download and use any file.
Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that SEJH provides for this service shall be prohibited.
However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
This download service is provided through the Internet. Please acknowledge that SEJH provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
Please use this service at your own risk.
If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
Notices:
Files are subject to deletion, or modification of the contents or specifications without notice.
Please confirm that the downloading file size completely accords
with the download file size shown.
If the file sizes do not match, delete the file without decompressing and then download the same file once again.
For details, please read the following
PDF:fujsxsio.pdf ( 1,282KB )
For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Contents
Ver. 1.13.07 (Jul. 12, 2012)
The following functions were added:
General Interface Capsule FFK120A-C10 is supported.
USB/RS-422/485 Conversion Adapter is supported. * To use USB/RS-422/485 Conversion Adapter, GP-Pro EX Ver. 3.00.000 or later is required.
LT3000 Series is supported.
The following issues were corrected:
When the task type is FIXED_CYCLE only, the communication error occurs and communication is disabled.
When new variable data are made, it may be made as the already existing name.
32bit variable may be read/written separately as each 16bit.
Installation (This file is self-extracting.)
Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
Click on the file name above to start downloading the file.
After download is complete, double-click on the downloaded file to start installation.
Follow the instructions on the screen.
After installation, start GP-Pro EX/Pro-Server EX.
Select [Fuji Electric Co., Ltd.] for "Manufacturer" and [MICREX-SX Series SIO] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
In case of using a project, created with a version below than V1.11.04
It is necessary to reallocate a variable to a real address when using variable data.
Instructions on how to reallocate to real address.
Open the project file with driver Ver. 1.11.04 or later, installed in GP-Pro EX.
Open the “Variable List” dialog from the Individual Device Settings.
Delete all of the worksheet(s) (This will delete all Variable Data)
Delete all Structure / Array (If there are Embedded Structures / 2D Arrays then the higher level must be deleted first.)
Import / Re-enter Structures / Arrays
Import / Re-enter Variables
Click OK to close dialog
Click OK to save new Variable Data
*
Please don’t close the “Variable List” dialog while doing the procedures above. If the “Variable List” dialog is closed, the allocated variables to the parts in the screen will become “-Undefined-“.
Update History:
[Ver. 1.13.07] (Jul. 12, 2012)
The following functions were added:
General Interface Capsule FFK120A-C10 is supported.
USB/RS-422/485 Conversion Adapter is supported. * To use USB/RS-422/485 Conversion Adapter, GP-Pro EX Ver. 3.00.000 or later is required.
LT3000 Series is supported.
The following issues were corrected:
When the task type is FIXED_CYCLE only, the communication error occurs and communication is disabled.
When new variable data are made, it may be made as the already existing name.
32bit variable may be read/written separately as each 16bit.
[Ver. 1.12.06]
The following functions were added:
GP4000 Series is supported. * To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
GP4000M Series is supported. * To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required
[Ver. 1.12.05]
The following function was added:
Add Indirect Device is added. * To use Add Indirect Device, GP-Pro EX Ver. 2.70.000 or later is required.
The following issues were corrected:
When the worksheet which does not define the variable is chosen, the display of the variable name is not updated
When the name of the Derived Data Type(Structure/Array) is edited, the Derived Data Type is made as a new Derived Data Type.
When the CSV file that a large quantity of variable data are defined is imported, it may be replied nothing.
When New variable data is made, old variable data is not deleted automaticly.
[Ver. 1.11.04] (Dec. 24, 2010)
The following function was added:
GP-4105, GP-4106 are supported. * To use a GP-4105, GP-4106, GP-Pro EX Ver. 2.60.000 or later is required.
The following issues were corrected:
In rare cases, a variable that have been allocated to a real address, is unmatched with the Fuji Electric Co. Ltd. Micrex-SX Series D300Win software.
In rare cases, the displayed address in the left side of the [Address] window is unfinished.
In rare cases, putting a comment or space in the IEC file will result in an error when importing.
[Ver. 1.10.03] (Nov. 12, 2009)
The following issues were corrected:
GP-Pro EX may be forcibly terminated when the address input dialog is opened.
GP-Pro EX may stop responding when import is performed and variables are overwritten.
[Ver. 1.10.02] (May. 8, 2008)
The following issue was corrected:
When create structure in variable data, there is the case that display cannot communicate with PLC.
[Ver. 1.10.01] (Oct. 30, 2007)
The following issue was corrected:
When there are some units such as LonWorks Network Interface Module, error is occurred.
Last Updated :Aug. 23, 2012 Posted : Oct. 30, 2007
