Contact us
Back to Top

Driver Download

>Temperature Controllers >Azbil Corporation Controller (CPL) Driver

Please acknowledge the following terms of use before you use our download service. Download of any file signifies your agreement to the terms of use.

Terms of Use
  1. Digital shall retain all intellectual property rights to the files that Digital provides for this service.
  2. Who, uses or plans to use Digital's products, may download and use any file.
  3. Reproduction, disclosure, re-publication, assignment, lease, decompilation, modification, falsification or reuse of any file that Digital provides for this service shall be prohibited.
    However, for manuals, samples, BMP images and CAD files, you may reprint, duplicate, quote a part of the content or the whole on your company's specification sheets, or instruction manuals for built-in products. Also you may change the layout of the content.
  4. This download service is provided through the Internet. Please acknowledge that Digital provides no guarantee of the condition at the time of provision, the availability of access and the condition of use concerning this service before you use this service.
  5. Please use this service at your own risk.
  6. If any additional conditions such as service usage conditions are attached to the downloaded files, please comply with such conditions as well.
  1. Files are subject to deletion, or modification of the contents or specifications without notice.
  2. Please confirm that the downloading file size completely accords with the download file size shown.
  3. If the file sizes do not match, delete the file without decompressing and then download the same file once again.


Precautions for adding a new driver onto Windows Vista/7
Precautions for adding a new driver at Daylight Saving Time

Title Azbil Corporation Controller (CPL) Driver
Version Ver. 1.16.05
File Name YTK_CPLS.exe
File Size 1,110KB
Supported Software GP-Pro EX Ver. 2.10.000 or later
Pro-Server EX Ver. 1.30.000 or later
To check your version, go to the ” Help ” menu → ” Version Info ”.
Supported Devices
  • SDC10 Series
  • SDC15 Series
  • SDC20 Series
  • SDC21 Series
  • SDC25 Series
  • SDC26 Series
  • SDC30 Series
  • SDC31 Series
  • SDC35 Series
  • SDC36 Series
  • SDC40A Series
  • SDC40B Series
  • SDC40G Series
  • SDC45 Series
  • SDC46 Series
  • DMC10 Series
  • DMC50 Series
  • DCP31 Series
  • DCP32 Series
  • DCP551 Series
  • DCP552 Series
  • CMC10B Series
  • PBC Series
  • CMS Series
  • CMF Series
  • CMQ-V Series
  • MPC Series
  • MVF Series
  • CML Series
  • AUR350C Series
  • AUR450C Series
  • RX Series
  • BC-R Series
Supported Models
  • GP3000 Series
  • LT3000 Series
  • GP4100 Series (GP4105, GP4106 and GP4107: GP-Pro EX Ver.2.60.000 or later. GP4104 (Ethernet Multilink only): GP-Pro EX Ver.2.70.000 or later)
  • GP4000M Series (GP-Pro EX Ver. 2.71.000 or later)
  • GP4000 Series (GP-Pro EX Ver. 3.00.000 or later)
  • LT4000M Series (GP-Pro EX Ver. 3.12.000 or later)
  • SP5000 Series (GP-Pro EX Ver. 4.00.000 or later)
  • IPC Series for WinGP
  • General PCs for WinGP
Device/PLC Connection Manual For details, please read the following
PDF:ytk_cpls.pdf ( 9,218KB )

For general information regarding Device connection and documentation conventions, please refer to "Device/PLC Connection Manual".
Updated Content Ver. 1.16.05 (Dec. 2, 2014)
The following issues have been changed:
  • Burner Controller BC-R series is supported.

How to install (This is a self-extracting file.)

  1. Please make sure that the supported software is installed. Prior to installion, close all applications running on a PC including any resident programs such as a virus detection program, etc.
  2. Click on the file name above to start downloading the file.
  3. After download is complete, double-click on the downloaded file to start installation.
  4. Follow the instructions on the screen.
  5. After installation, start GP-Pro EX/Pro-Server EX.
  6. Select [Azbil Corporation] for "Manufacturer" and [Controller (CPL)] for "Series" in [Device/PLC] settings of [System Settings] on the [Project] menu.
When using the driver, be sure to refer to the Device Connection Manual above (PDF file). Also, please refer to "Device/PLC Connection Manual" for general information regarding device connection and documentation conventions.

Update History:

[Ver. 1.16.05] (Dec. 2, 2014)

The following issues have been changed:
  • Burner Controller BC-R series is supported.

[Ver. 1.15.04] (Oct. 30, 2012)

The following issues have been changed:
  • PBC, CMS, CMF, CMQ-V, MPC, MVF, CML, AUR450C, AUR350C, RX series are supported.
  • The manufacturer name and series name are changed.
The following issues have been fixed:
  • The “Reference To Parameter” dialog is hidden in Pro-Server EX.
  • When “120DPI” is specified for the DPI setting on the OS, the button on the “Reference To Parameter” dialog is not displayed.

[Ver. 1.14.03]

The following functions were added:
  • GP4000 Series is supported.
    *To use GP4000 Series, GP-Pro EX Ver. 3.00.000 or later is required.
  • GP4000M Series is supported.
    *To use GP4000M Series, GP-Pro EX Ver. 2.71.000 or later is required.

[Ver. 1.13.03] (May 17, 2010)

The following models were supported:
  • GP4105, GP4106 and GP4107
    *To use GP4105/GP4106/GP4107, GP-Pro EX Ver. 2.60.000 or later is required.
  • GP4104 (Ethernet Multilink)
    *To use GP4104 (Ethernet Multilink), GP-Pro EX Ver. 2.70.000 or later is required.

[Ver. 1.12.03]

The following issue was fixed:
  • The system error may occur in GP-3200/ST3000 series.

[Ver. 1.12.02] (Mar. 3, 2008)

The following setting was added:
  • The parameter reference lists for SDC45 series and SDC46 series are updated.

[Ver. 1.12.01] (Nov. 29, 2007)

The following addition and improvement were performed:
  • SDC45, SDC46, DMC50 and CMC10B series are added to the supported devices.
  • SDC15, SDC25, SDC26, SDC35, SDC36 and DMC10 series are improved in data reading performance.

[Ver. 1.11.01] (Oct. 1, 2007)

The following function was supported:
  • Device Monitor
    * To use a Device Monitor function, GP-Pro EX Ver. 2.00.000 or later is required.

Last Updated : Dec. 2, 2014
Posted : Nov. 29, 2007

| Return to Top | | Back | HOME |
FAQ for use | Protection of Personal Information | Trademark Acknowledgments | About Intellectual Property Rights | Terms of Use
Copyright (C) 2005- Digital Electronics Corporation. All Rights Reserved.