Function Expansion Memory for GP3000 Series
Up to 32,767 alarm messages can be registered on a GP3000 unit !

Brief

Installing Function Expansion Memory on a GP3000 unit allows you to expand the number of alarm registration messages to 32,767. Even if vast numbers of alarm messages are necessary because of a system that uses multiple PLCs, Alarm Monitor can perform using only one GP unit.

Applicable Model
[ 15" ]	GP-3750T
[ 12.1" ]	GP-3650T / GP-3600T
[ 10.4" ]	GP-3560T / GP-3550T / GP-3500T / GP-3510T / GP-3500S / GP-3500L
[ 7.5" ]	GP-3450T / GP-3400T / GP-3400S
Applicable Software
GP-Pro EX Ver.2.5 or higher

Main Features

Point 1

The number of registered alarm messages can be expanded from 2,048 to 32,767.

Point 2

Function Expansion Memory can be easily installed by customers at any time.

* To install the Function Expansion Memory on a 10.4" TFT or 7.5" model, open the rear cover and insert it on a connector inside.

Point 3

Using the new functions of GP-Pro EX version 2.5, you can reduce the time required to setup alarm registrations.

-Share Multiple PLC Alarm Messages
*Available when a Function Expansion Memory is mounted.

Eliminates the need to individually create alarm messages through standardization of one message among multiple devices (addresses).

-Switch Blocks in Alarm Indicator

Reduce time involved in screen creation and switch between alarms separated into blocks according to the device or level of importance on one alarm indicator.