|
>2006 > Jan. 13
Notes for the revision number change due to change of 12-inch liquid crystal devices for the GP/GLC/FP/UF units, and change of backlights.
Thank you for using our Pro-face products.
Because the present 12-inch liquid crystal devices for GP/GLC/FP/UF Series products will no longer be manufactured, new devices will be used. For this reason, the revision numbers of the following products will be changed. In addition to this, please note that the backlights for maintenance are also changed.
The Models for the Revision Number's Alteration
| Product Name |
Model Number |
Supported Revision |
| GP-2600T (AC100 to 240V) |
GP2600-TC11 |
4 |
| GP-2600T (DC24V) |
GP2600-TC41-24V |
3 |
| GP-2601T (AC100 to 240V) |
GP2601-TC11 |
4 |
| GLC2600T (AC100 to 240V) |
GLC2600-TC41-200V |
4 |
| GLC2600T (DC24V) |
GLC2600-TC41-24V |
3 |
| FP-2600T (AC100V to 240V) |
FP2600-T12 |
1 |
| FP-2600T (DC24V) |
FP2600-T42-24V |
1 |
| UF6610-2 (Special Hardware) |
UF6610-2-1 |
1 |
- The new liquid crystal devices have wider angle of view and higher contrast, compared with old devices.
For the product models with the new devices, each supported revision number in the above list becomes an asterisk.
If the supported revision number is not an asterisk or marked, the new device is not installed with the LCD device.
About Backlights
With the change of the liquid crystal devices, the backlights are also changed. Please be sure of the backlight's model when changing the backlights for maintenance.
| |
Model |
| Backlight for the new liquid crystal device |
CA3-BLU12-01 |
| Backlight for the old liquid crystal device |
PS600-BLU00 |
The following sticker showing the backlight's model number is in the rear left bottom of the product with new liquid crystal devices. Please make sure the model number when changing the backlights.
|
