| Important Note on using USB transfer cable for GP3000 Series |
 |
|
We appreciate your patronage for our products.
This note describes the important notes on using
the USB transfer cable.
|
| Outline |
When the GP3000 Series power is turned ON with your
computer connected to the GP3000 via the USB Data
Transfer Cable, there may be rare occasions when
the GP3000
does not start up successfully. Even if the phenomenon appears, it will not
affect the GP3000 performance and durability. Additionally, this phenomenon
does not cause to harm the GP3000 unit, and all
operations, such as a touch operation a transfer
function and so on, are performed normally.
|
| Product and Model No. |
|
Product : USB transfer cable
Model No. : CA3-USBCB-01
|
| Remedy |
After turning ON the GP3000 Series power, connect
the USB transfer cable.
If the phenomenon appears, the recovery is possible with the procedure
below.
| (1) |
With the USB transfer cable
disconnected, turn OFF the GP3000 Series power
and wait about 1minutes (After clearing the
Error Detection). After that, turn ON the GP3000
Series power. |
| (2) |
Connect the USB transfer cable. |
|
| |
| If you have problems with the recovery method above,
contact our sales representative or customer support division. |
| |
|
|
|
|
